All Categories

History

Physical and chemical equipment Oxygen measurement system Entry level Oxygen electrode system for photosynthesis/respiration research Chloroview1-Chloroview1
Physical and chemical equipment Oxygen measurement system Entry level Oxygen electrode system for photosynthesis/respiration research Chloroview1-Asahiko Trading Co., Ltd.

Physical and chemical equipment Oxygen measurement system Entry level Oxygen electrode system for photosynthesis/respiration research Chloroview1
Asahiko Trading Co., Ltd.

🧪 Chemical Industry Use

Asahiko Trading Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

1.8hours

Very Fast Response


About This Product

■Summary

The OXYV1 Oxyview control unit is very useful for teaching photosynthesis and cellular respiration. The Oxyview control unit is fully compatible with a variety of oxygen electrode chambers manufactured by Hansatech Instruments, so it can be used in both liquid and gas phases. Oxyview is configured and controlled via a control panel with four touch-sensitive buttons. Configuration is easy by following each step according to the display guidelines on the menu screen. These setup steps include setting stirrer speed (for liquid phase measurements) and backoff and gain settings. Once configured, the Oxyview control unit will start reading the oxygen content of the sample. The Oxyview control unit has an integrated magnetic stirrer for liquid phase applications, allowing the overall footprint of the Oxyview1 system to be minimized (90 x 135mm). Useful when multiple setups are required to run a program with limited space. The Oxyview control unit is powered by a 12VDC wall cube connected directly to the back of the unit. There is also a 0-5V analog output on the back that allows measurements from the control unit to be logged to an external recording device such as a chart recorder or data logger that accepts a 0-5V analog input.

■Features

- Convenient entry-level system for studying photosynthesis and respiration in liquid-phase samples under illumination ・DW1 oxygen electrode unit with integrated S1 electrode disc sensor ・Oxygen electrode control and signal acquisition by Oxyview control unit ・LS2 high brightness tungsten halogen white light source ・LS2 light intensity adjustable by inserting a neutral density filter ・Oxygen signal output from Oxyview to recording device via 0-5V analog output ・Quantitherm light/temperature sensor for light source calibration

  • Product

    Physical and chemical equipment Oxygen measurement system Entry level Oxygen electrode system for photosynthesis/respiration research Chloroview1
  • Usage Scenarios

    Chemical Industry Use

Share this product


40+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Physical and chemical equipment Oxygen measurement system Entry level Oxygen electrode system for photosynthesis/respiration research Chloroview1

Image Part Number Price (excluding tax) Electrode type Oxygen consumption Suitability Measuring range Temperature control Residual current Structure Sensitivity Response time Fine adjustment Intensity adjustment Dimensions (width x height) Dimensions (HWD) Size Resolution Polarization voltage Light source Signal input Plunger Back off Sample capacity Sample chamber Gain Analog output Oxyview 1 Electrode Control Unit Power Supply Oxyview 1 Electrode Control Unit Weight LS2 light source power supply LS2 light source weight Maximum strength at DW1 DW1 electrode chamber weight
Physical and chemical equipment Oxygen measurement system Entry level Oxygen electrode system for photosynthesis/respiration research Chloroview1-Part Number-Chloroview1

Chloroview1

Available upon quote

Clark type polarographic sensor

Usually <0.015μmol/hr^-1

Liquid phase respiration/photosynthesis

Oxygen: 0~100%

Water jacket that can be connected to a separate hot water tank

Typically 0.02-0.04μA at 0% O₂

Clear cast acrylic

Typically 0.6-1.4μA at 20%

Typically <10 seconds, typically <5 seconds

1mV step

Combination of 4 types of optical filters (included with LS2)

65×105mm

90×135×85mm

Lightweight housing: 145 x 65 x 75mm

10×10^-6μmols/ml at 20℃

Selectable between 0.4~0.9V (0.7V is recommended by default)

100W tungsten halogen
(If you want 50W, please consult us separately)

Oxygen electrode (SMB)

Highly variable plunger assembly with central pore for sample addition

Back off signal in 1mV steps

0.2~2.5ml

Precision bore, borosilicate glass tube

Coarse adjustment: ×1, ×2, ×5, ×10, ×20, ×50, ×100

0~5V electrode signal

95~260V universal input mains power
Output 12V DC 2.5A

1.3kg

Main power supply, stabilized power supply
12VDC10A,120/240V 60/60Hz

1.0kg

1800μmolm^-2s^-1

100g

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Pulse Oximeters Products

Other products of Asahiko Trading Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Asahiko Trading Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

1.8hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree