Refrigerated air dryer with aftercooler for normal pressure 1.0MPa (10atm) NDK220
Toyo Service Co., Ltd.
About This Product
During humid periods such as summer, water mixes with the compressed air from the air compressor. This is because the compressed hot air is cooled and turns into water inside the pipes. A large amount of water may spout from end equipment such as air guns. A refrigerated air dryer efficiently removes this moisture.
Basically, it should be selected according to the horsepower of the air compressor, but it is also possible to choose according to the air consumption of the terminal equipment. However, it is generally safe to choose a slightly larger size. If an air dryer is placed in a narrow space or in a poor installation environment, its performance will decrease in a short period of time. Please use it in an appropriate installation environment.
There are two types of refrigeration air dryers: regular type and high temperature intake type. Air processing temperature is 60℃ for normal type and 80℃ for high temperature intake type. The high temperature intake type is equipped with an aftercooler to reliably remove moisture. We recommend the high temperature intake type for harsh usage environments.
The high-temperature intake type exhibits its cooling function even when the ambient temperature is 45℃, but using it at a room temperature that does not exceed 40℃ will prevent long-term failure. Made by Nippon Seiki, no condensation at atmospheric pressure up to -17℃. For high pressure compressors, please use the high pressure type.
Refrigerated air dryers require regular maintenance. It is not good to leave dirt on the ventilation openings. Please clean it occasionally. Performance will improve significantly. Performance cannot be achieved in a narrow room with poor ventilation or in a place with high temperatures of 40 degrees or higher. The life of the dryer will also be shortened.
Compressor and refrigeration air dryer piping must be done properly. Iron pipes can be used for indoor piping, but it is not recommended to connect the compressor and dryer with iron pipes. A flexible one that can absorb vibrations is best. The manufacturer recommends connecting with a heat-resistant rubber hose.
-
Product
Refrigerated air dryer with aftercooler for normal pressure 1.0MPa (10atm) NDK220
-
Handling Company
Toyo Service Co., Ltd.
-
Categories
1 Models of Refrigerated air dryer with aftercooler for normal pressure 1.0MPa (10atm) NDK220
| Product Image | Part Number | Price (excluding tax) | Applicable compressor | Power (V) | Processed air volume (L/min) | Rated current (A) |
|---|---|---|---|---|---|---|
NDK220 |
Available upon quote | 22kw (30hp) | AC200V | 4100 | 5.9 |
Customers who viewed this product also viewed
Other products of Toyo Service Co., Ltd.
View more products of Toyo Service Co., Ltd.
About Company Handling This Product
- Japan