Refrigerated air dryer with aftercooler for normal pressure 1.0MPa (10atm) NDK110
Toyo Service Co., Ltd.

Toyo Service Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

47.5hours

About This Product

During humid periods such as summer, water mixes with the compressed air from the air compressor. This is because the compressed hot air is cooled and turns into water inside the pipes. A large amount of water may spout from end equipment such as air guns. A refrigerated air dryer efficiently removes this moisture.

Basically, it should be selected according to the horsepower of the air compressor, but it is also possible to choose according to the air consumption of the terminal equipment. However, it is generally safe to choose a slightly larger size. If an air dryer is placed in a narrow space or in a poor installation environment, its performance will decrease in a short period of time. Please use it in an appropriate installation environment.

There are two types of refrigeration air dryers: regular type and high temperature intake type. Air processing temperature is 60℃ for normal type and 80℃ for high temperature intake type. The high temperature intake type is equipped with an aftercooler to reliably remove moisture. We recommend the high temperature intake type for harsh usage environments.

The high-temperature intake type exhibits its cooling function even when the ambient temperature is 45℃, but using it at a room temperature that does not exceed 40℃ will prevent long-term failure. Made by Nippon Seiki, no condensation at atmospheric pressure up to -17℃. For high pressure compressors, please use the high pressure type.

Refrigerated air dryers require regular maintenance. It is not good to leave dirt on the ventilation openings. Please clean it occasionally. Performance will improve significantly. Performance cannot be achieved in a narrow room with poor ventilation or in a place with high temperatures of 40 degrees or higher. The life of the dryer will also be shortened.

Compressor and refrigeration air dryer piping must be done properly. Iron pipes can be used for indoor piping, but it is not recommended to connect the compressor and dryer with iron pipes. A flexible one that can absorb vibrations is best. The manufacturer recommends connecting with a heat-resistant rubber hose.

Model
There are 1 models for this product.

Product
Refrigerated air dryer with aftercooler for normal pressure 1.0MPa (10atm) NDK110

Handling Company
Toyo Service Co., Ltd.

Categories

Separation and Extraction Equipment

Drain Separators

50+ people viewing

Last viewed: 16 minutes ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Refrigerated air dryer with aftercooler for normal pressure 1.0MPa (10atm) NDK110

Image	Part Number	Price (excluding tax)	Power (V)	Applicable compressor	Rated current (A)	Processed air volume (L/min)
	NDK110	Available upon quote	AC200V	11kw (15hp)	2.5	1600

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Drain discharge device BEKOMAT

BEKO TECHNOLOGIES K.K.

110+ people viewing

Last viewed: 1 hour ago

Drain Separators

4 models listed

Remove condensed water at the compressed air outlet of the compressor Centrifugal separator

Kaeser Kompressor Co., Ltd.

60+ people viewing

Last viewed: 9 hours ago

Response time: 3.77 hours

Drain Separators

3 models listed

Remove condensate from compressed air systems Eco-Drain electronic condensate drain

Kaeser Kompressor Co., Ltd.

70+ people viewing

Last viewed: 16 minutes ago

Response time: 3.77 hours

Drain Separators

4 models listed

Drain separator

CKD

50+ people viewing

Last viewed: 16 minutes ago

Response time: 22.32 hours

Drain Separators

2 models listed

Temperature and pressure regulating equipment Drain separator Drain discharger FX

CKD

80+ people viewing

Last viewed: 3 hours ago

Response time: 22.32 hours

Drain Separators

5 models listed

Compressor drain water treatment equipment Separation/adsorption type drain ECO series

Zeotech of Ecology Co., Ltd.

60+ people viewing

Last viewed: 2 minutes ago

Drain Separators

4 models listed

Vacuum pump compressor parts Automeropalator MTN-D10

Mitsukai Seisakusho Co., Ltd.

380+ people viewing

Last viewed: 5 hours ago

Response time: 44.95 hours

Drain Separators

3 models listed

Refrigerated air dryer Normal air intake dryer Normal pressure 1.0MPa (10 atm) NH-8007NT

Toyo Service Co., Ltd.

60+ people viewing

Last viewed: 5 minutes ago

Response time: 47.54 hours

Drain Separators

2 models listed

Refrigerated air dryer Normal air intake dryer Normal pressure 1.0MPa (10 atm) NH-8012NT

Toyo Service Co., Ltd.

60+ people viewing

Last viewed: 15 minutes ago

Response time: 47.54 hours

Drain Separators

2 models listed

Refrigerated air dryer NDK22H for high temperature air intake high pressure 1.4MPa (14 atm)

Toyo Service Co., Ltd.

50+ people viewing

Last viewed: 16 minutes ago

Response time: 47.54 hours

Drain Separators

Refrigerated air dryer NDK37H for high temperature air intake high pressure 1.4MPa (14 atm)

Toyo Service Co., Ltd.

50+ people viewing

Last viewed: 16 minutes ago

Response time: 47.54 hours

Drain Separators

Refrigerated air dryer NDK75H for high temperature air intake high pressure 1.4MPa (14 atm)

Toyo Service Co., Ltd.

60+ people viewing

Last viewed: 16 minutes ago

Response time: 47.54 hours

Drain Separators

See More Drain Separators Products

Other products of Toyo Service Co., Ltd.

Reviews shown here are reviews of companies.

Staple 4J size

Toyo Service Co., Ltd.

70+ people viewing

Last viewed: 5 hours ago

Response time: 47.54 hours

Staples

Staple 10J size

Toyo Service Co., Ltd.

90+ people viewing

Last viewed: 48 minutes ago

Response time: 47.54 hours

Staples

Staple 10F size

Toyo Service Co., Ltd.

50+ people viewing

Last viewed: 14 hours ago

Response time: 47.54 hours

Staples

Staple 12F size

Toyo Service Co., Ltd.

60+ people viewing

Response time: 47.54 hours

Staples

Staple 3M size

Toyo Service Co., Ltd.

70+ people viewing

Last viewed: 5 hours ago

Response time: 47.54 hours

Staples

Staple 7M size

Toyo Service Co., Ltd.

60+ people viewing

Last viewed: 7 hours ago

Response time: 47.54 hours

Staples

Staple H3 size

Toyo Service Co., Ltd.

60+ people viewing

Response time: 47.54 hours

Staples

Staple H12 size

Toyo Service Co., Ltd.

80+ people viewing

Last viewed: 13 hours ago

Response time: 47.54 hours

Staples

Staple 4MA size

Toyo Service Co., Ltd.

60+ people viewing

Response time: 47.54 hours

Staples

Staple 7MA size

Toyo Service Co., Ltd.

70+ people viewing

Last viewed: 7 hours ago

Response time: 47.54 hours

Staples

Air tacker H line air tacker AT-3033

Toyo Service Co., Ltd.

90+ people viewing

Response time: 47.54 hours

Tackers

2 models listed

Staple type clinch stapler Clinch type air tacker made by OMER, Italy

Toyo Service Co., Ltd.

100+ people viewing

Last viewed: 1 hour ago

Response time: 47.54 hours

Staplers

3 models listed

View more products of Toyo Service Co., Ltd.

About Company Handling This Product

Toyo Service Co., Ltd.

Response Rate

100.0%

Response Time

47.5hrs

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Refrigerated air dryer with aftercooler for normal pressure 1.0MPa (10atm) NDK110 Toyo Service Co., Ltd.

Toyo Service Co., Ltd.'s Response Status

About This Product

1 Models of Refrigerated air dryer with aftercooler for normal pressure 1.0MPa (10atm) NDK110

NDK110

Customers who viewed this product also viewed

Other products of Toyo Service Co., Ltd.

About Company Handling This Product

Related search keywords

Refrigerated air dryer with aftercooler for normal pressure 1.0MPa (10atm) NDK110
Toyo Service Co., Ltd.