This product is registered by A Smart Co., Ltd..
About This Product
■Rolling board (roller base) / 1 set
This is a set of ``base and roller'' that allows you to create an edge on the clay using your favorite frame (sold separately), design the inside with free ideas, and then pour in eco-friendly material A1 and harden it. Add wax to this by heating it in the microwave to soften it a little, then spread it inside and flatten it with a rolling pin to make it to a uniform height.
After applying a mold release agent to the surface, use a small wooden frame (sold separately) to press the mold onto the wax surface, use the lines as a guide to push in stamps, twigs, leaves, etc. to create a design, then embed the frame so that there are no gaps and create an A1 or Created by pouring plaster liquid. In addition, you can cut out the clay by adjusting it to a certain thickness, or use A1 paper to attach a handle and make handmade stamps.
Wax and frame sold separately. Fantasy wax is a special wax that softens easily when heated in the microwave. Very delicate patterns can be copied, and when you want to make partial corrections, you can easily heat the pen tip to smooth the wax surface or use a clay stick to make corrections. Another feature is that it can be melted, poured, and solidified.
It is hard enough to be rolled out with a roller without heating, but the fastest method is to heat it in the microwave. The heating time will vary depending on the amount, but the amount used in this frame will soften in the microwave for about 10 seconds. If you heat it for a little while, it will become loose, like melted chocolate, and is not suitable for stamping.
At first, try it for about 10 seconds, and if it's still hard, it's better to touch it for about 5-10 seconds to adjust it. Even if it turns into a liquid, it won't stick to your fingers, and if you let it cool, it will gradually harden and you can reuse it as many times as you like. Also, everything except the plastic sheet and roller can be placed in the microwave as is.
■Set contents
・For rolling board body depth 8mm
・Plastic roller
・Plastic sheet
・Bottom raising board 4mm
・The thickness can be finished to 4mm or 8mm.
-
-
Product
Rolling board (roller base) 1 set
Share this product
