Panel saw SPN1 series
SHINX Ltd.

SPN1-1800

Lowering: 3~15m/min (inverter controlled continuously variable speed) / Rising: Normal cutting: 18m/min (constant), Crease cutting 15m/min (constant), Reciprocating cutting: 3~15m/min (variably variable) )

1,000kg

3,880×1,400×2,750mm

U25-85A (cream color)

Parallel clamp type material presser

Square ruler

Flat horizontal ruler

Rotary ruler

Machine fall prevention safety switch, saw cover closure confirmation switch, material presser safety shutter, restricted chain fence (rear of the machine), restricted area display tape

Linear guide rail standard/flat slide rail combination

Maximum 1,830mm

Maximum 2,150mm

Max 45mm

3 cutting modes (normal/ruled/reciprocating), selection method by switch

Adjustable blade edge bake (width adjustment)

Φ305mm (12 inches), hole diameter: φ25.4mm (can be installed up to φ355mm (14 inches))

Manual adjustment

5 sets of 3 tiers/lower tier x 2, middle tier x 2, upper tier x 1

3,500min^-1 (50Hz) / 4,200min^-1 (60Hz)

For main shaft: 3.7kw/4P, for saw table elevation: 0.75kw/4P (IE3)

Full baking board (brown color)

Automatic marking setting (double cylinder)

SPN1-2400G

Lowering: 3~15m/min (inverter controlled continuously variable speed) / Rising: Normal cutting: 18m/min (constant), Crease cutting 15m/min (constant), Reciprocating cutting: 3~15m/min (variably variable) )

1,130kg

4,180×1,470×3,350mm

U25-85A (cream color)

Parallel clamp material presser

Square ruler

Flat horizontal ruler

Rotary ruler

Machine fall prevention safety switch, saw cover closure confirmation switch, material presser safety shutter, restricted chain fence (rear of the machine), restricted area display tape

Linear guide rail standard/flat slide rail combination

Maximum 2,430mm

Maximum 2,450mm

Max 45mm

3 cutting modes (normal/ruled/reciprocating), selection method by switch

Adjustable blade edge bake (width adjustment)

Φ305mm (12 inches), hole diameter: φ25.4mm (can be installed up to φ355mm (14 inches))

Manual adjustment

5 sets of 3 tiers/lower tier x 2, middle tier x 2, upper tier x 1

3,500min^-1 (50Hz) / 4,200min^-1 (60Hz)

For main shaft: 3.7kw/4P, for saw table elevation: 0.75kw/4P (IE3)

Full baking board (brown color)

Automatic marking setting (double cylinder)

SPN1-2400R

Lowering: 3~15m/min (inverter controlled continuously variable speed) / Rising: Normal cutting: 18m/min (constant), Crease cutting 15m/min (constant), Reciprocating cutting: 3~15m/min (variably variable) )

1,130kg

4,180×1,470×3,350mm

U25-85A (cream color)

Parallel clamp material presser

Fixed rack movable ruler

Flat horizontal ruler

Rotary ruler

Machine fall prevention safety switch, saw cover closure confirmation switch, material presser safety shutter, restricted chain fence (rear of the machine), restricted area display tape

Linear guide rail standard/flat slide rail combination

Maximum 2,430mm

Maximum 2,450mm

Max 45mm

3 cutting modes (normal/ruled/reciprocating), selection method by switch

Adjustable blade edge bake (width adjustment)

Φ305mm (12 inches), hole diameter: φ25.4mm (can be installed up to φ355mm (14 inches))

Manual adjustment

5 sets of 3 tiers/lower tier x 2, middle tier x 2, upper tier x 1

3,500min^-1 (50Hz) / 4,200min^-1 (60Hz)

For main shaft: 3.7kw/4P, for saw table elevation: 0.75kw/4P (IE3)

Full baking board (brown color)

Automatic marking setting (double cylinder)

SPN1-3000

Lowering: 3~15m/min (inverter controlled continuously variable speed) / Rising: Normal cutting: 18m/min (constant), Crease cutting 15m/min (constant), Reciprocating cutting: 3~15m/min (variably variable) )

1,250kg

4,780×1,550×3,950mm

U25-85A (cream color)

Parallel clamp material presser

Flat horizontal ruler

Rotary ruler

Machine fall prevention safety switch, saw cover closure confirmation switch, material presser safety shutter, restricted chain fence (rear of the machine), restricted area display tape

Linear guide rail standard/flat slide rail combination

Maximum 3,030mm

Maximum 3,050mm

Max 45mm

3 cutting modes (normal/ruled/reciprocating), selection method by switch

Adjustable blade edge bake (width adjustment)

Φ305mm (12 inches), hole diameter: φ25.4mm (can be installed up to φ355mm (14 inches))

Manual adjustment

5 sets of 3 tiers/lower tier x 2, middle tier x 2, upper tier x 1

3,500min^-1 (50Hz) / 4,200min^-1 (60Hz)

For main shaft: 3.7kw/4P, for saw table elevation: 0.75kw/4P (IE3)

Full baking board (brown color)

Automatic marking setting (double cylinder)

SPN1-1200

Lowering: 3~15m/min (inverter controlled continuously variable speed) / Rising: Normal cutting: 18m/min (constant), Crease cutting 15m/min (constant), Reciprocating cutting: 3~15m/min (variably variable) )

900kg

3,050×1,330×2,150mm

U25-85A (cream color)

Parallel clamp material presser

Flat horizontal ruler

Rotary ruler

Machine fall prevention safety switch, saw cover closure confirmation switch, material presser safety shutter, restricted chain fence (rear of the machine), restricted area display tape

Linear guide rail standard/flat slide rail combination

Maximum 1,230mm

Maximum 1,250mm

Max 45mm

3 cutting modes (normal/ruled/reciprocating), selection method by switch

Adjustable blade edge bake (width adjustment)

Φ305mm (12 inches), hole diameter: φ25.4mm (can be installed up to φ355mm (14 inches))

Manual adjustment

4 sets of 2 tiers/lower tier x 2, middle tier x 2

3,500min^-1 (50Hz) / 4,200min^-1 (60Hz)

For main shaft: 3.7kw/4P, for saw table elevation: 0.75kw/4P (IE3)

Full baking board (brown color)

Automatic marking setting (double cylinder)