Adhesive for interior and exterior ceramic tiles Semenpower 20kg can
Unique Co., Ltd.
About This Product
■Features
-Contains aggregate, so you can obtain strong adhesive strength just by mixing cement.
・Environmentally friendly adhesive
・Can be applied even when the base is wet
- Large tiles can also be pasted.
・Strong, can also attach stone materials. Just mix the cement. Plywood OK, no primer required
■How to use
・Remove dust, oil, and dirt from the base
・Please use by mixing 1 part cement power to 0.8 to 1 part cement.
・Please use up anything mixed with cement within 1 hour.
・When pasting tiles, press each tile thoroughly by rubbing them together.
・Apply immediately after application and within 20 minutes (23℃)
・For a plywood base, make a loose mortar with a ratio of cement power to cement [1:0.8], make combs of about 5 mm, rub it on the plywood, dry it, and then apply the [1:1] mortar to the tiles. Please soak it and paste it.
・Please wait at least 1 day after pasting before filling the joints.
- Estimated usage amount: 3 to 5 kg/m2 (when mixed with cement) 8 to 13 m2 can be used with 20 kg of Cement Power + 20 kg of cement
■Coating and pasting (for tile pasting)
- Apply a flat coat to a thickness of 3 to 5 mm without drawing comb marks, then paste the tiles. Or, after applying it flat, scrape it off with a 5mm or 7mm comb trowel before applying the tiles. Please keep the area of one application within 2m2.
・Please be careful when placing the leather in direct sunlight or in a well-ventilated place. If the skin is too sticky, apply water to the base to adjust the suction.
・When pasting the tiles, crimp them together and tap them in with the handle of a hammer. If you press it using a tile vibrator, you can make it stick even more securely. Peel off the tile and check that the adhesive area is at least 60%.
・Apply primer A to ALC boards and silica boards, and after drying, apply adhesive.
■Coating and pasting (for stone pasting)
・Remove dust and dirt from the back side of the stone.
・Please use "Super Uni" when using it for stone materials.
・Add the required amount of water to ``Super Uni'' and stir it, then apply the adhesive obtained to Dango.
-
Product
Adhesive for interior and exterior ceramic tiles Semenpower 20kg can
-
Handling Company
Unique Co., Ltd.
-
Categories
1 Models of Adhesive for interior and exterior ceramic tiles Semenpower 20kg can
| Product Image | Part Number | Price (excluding tax) | 4VOC standard compliance registration | Adhesive strength (N/mm2) | Applicable base | Applicable location | Applicable tiles | Broken state | Formaldehyde emission classification F★★★★Registered | JIS standard (N/mm2) | Main ingredients (things you need to prepare) | Pasting time after application (23℃) | Purpose | Standard usage amount (kg/m2) | Weight ratio | Weight/packing style |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Semen power |
$ 84.50〜 | JAIA402531 |
Mortar base: 2.5 Plywood base: 0.8 Tile base: 1.8 |
Mortar Plywood (lower finish) ALC board (“A Primer” treatment) Silica board (“A primer” treatment) FRP board (“A primer” treatment) *Cannot be used for FRP waterproofing |
Bathroom toilet kitchen washroom Around the entrance exterior wall floor |
Various ceramic tiles large tiles Ceramic board brick Stone materials such as marble (primer treatment required) |
Mortar base: adhesive Plywood base: Base (mortar) Tile base: adhesive |
F★★★★ JAIA008701 |
Mortar base: 0.6 or more Plywood base: 0.6 or more Tile base: 0.6 or more |
Acrylic resin emulsion (cement) | Within 20 minutes | Interior and exterior walls and floors |
Comb: 3.0kg~5.0kg Dumpling pasting: 2.0kg~5.0kg |
Cement power 1kg/cement 0.8kg~1kg | 20kg can |
Customers who viewed this product also viewed
Other products of Unique Co., Ltd.
View more products of Unique Co., Ltd.
About Company Handling This Product
- Japan