Powder type adhesive for stone and tiles (one material type) Super Uni-Super Uni (gray) (white) 20kg bag
Powder type adhesive for stone and tiles (one material type) Super Uni-Unique Co., Ltd.

Powder type adhesive for stone and tiles (one material type) Super Uni
Unique Co., Ltd.


About This Product

Strong adhesive just by mixing with water. Hardens quickly and has excellent workability. Can be used on heavy tiles and stones by adjusting the amount of water ■Features - Strong adhesive strength can be obtained just by mixing with water. - Can be used on heavy tiles and stones by adjusting the amount of water ・Cures in 5 hours (at a temperature of 23℃) ・The package is specially designed so it is resistant to moisture. ・Can be applied to plywood, perfect for underfloor heating, and even smoothes out rickety bases. ■Groundwork ・Please finish the base smooth and remove dirt and laitance. ・Please apply ``A Primer'' to water-absorbing substrates such as ALC boards and silica boards in advance. ・When using on a base that is likely to warp, we recommend "A Primer" treatment. - Cement-based adhesives like this product may have poor adhesion if applied lightly when exposed to wind, when the base is dry, or when using tiles that absorb a lot of water. In such cases, please apply a thick layer of adhesive or sprinkle water on the base before use. ・If used on siding boards that have been painted with paint, etc., adhesion may deteriorate depending on the paint. ■Mixture ・Place "Super Uni" and water in a container and mix with a hand mixer at low speed until uniform. ・Please use up the mixture within one hour. ■Coating and pasting (for tile pasting) - Apply a flat coat to a thickness of 3 to 5 mm without drawing comb marks, then paste the tiles. Or, after applying it flat, scrape it off with a 5mm or 7mm comb trowel before applying the tiles. Please keep the area of ​​one application within 2m2. ・Please be careful when placing the leather in direct sunlight or in a well-ventilated place. If the skin is too sticky, apply water to the base to adjust the suction. ・When pasting the tiles, crimp them together and tap them in with the handle of a hammer. If you press it using a tile vibrator, you can make it stick even more securely. Also, remove the tiles from time to time and check that the adhesive area is at least 60%. ・Apply primer A to ALC boards and silica boards, and after drying, apply adhesive. ■Coating and pasting (for stone pasting) ・Remove dust and dirt from the back side of the stone. ・Please use "Super Uni" when using it for stone materials. ・Add the required amount of water to ``Super Uni'' and stir it, then apply the adhesive obtained to Dango.

  • Product

    Powder type adhesive for stone and tiles (one material type) Super Uni

Share this product


30+ people viewing


Free
Since our quotes are free, feel free to use our service.

No Phone Number Required
You won’t have to worry about receiving unnecessary calls.

1 Models of Powder type adhesive for stone and tiles (one material type) Super Uni

Product Image Part Number Price (excluding tax) Adhesive strength (N/mm2) Applicable base Applicable location Applicable tiles Formaldehyde emission classification F★★★★Registered Main ingredients (things you need to prepare) Pasting time after application (23℃) Peeling location Purpose Sagging test (mm) Skin pasting time (minutes) Standard usage amount (kg/m2) Weight ratio Weight/packing style
Powder type adhesive for stone and tiles (one material type) Super Uni-Part Number-Super Uni (gray) (white) 20kg bag

Super Uni (gray) (white) 20kg bag

Available upon quote Cement mortar: 1.4
Plywood base: 0.6
Ceramic tile: 1.0
ALC board (A primer coating): 0.3
Mortar
plywood
ALC board (A primer treatment)
Silica board (A primer treatment)
FRP (A primer treatment: cannot be used for FRP waterproofing)
Bathroom
bathtub
toilet
kitchen
Washroom
Around the entrance
exterior wall
floor
Ceramic tile
Stone materials such as marble (primer treatment required)
porcelain tiles
weight tiles
F★★★★
NSK2004004
Powder type acrylic resin, cement (water) Within 20 minutes Cement mortar: Adhesive interlayer rupture
Plywood base: plywood surface fracture
Ceramic tile: Adhesive interlayer rupture
ALC board (A primer coating): Substrate destruction
Interior and exterior walls and floors 800g: 0
450g: 0
250g: 0
30 Comb: 3.0kg~5.0kg
Dumpling pasting: 2.0kg~5.0kg
Super Uni 20kg/Water 4.5kg~5.5kg 20kg bag

Customers who viewed this product also viewed

Other products of Unique Co., Ltd.


View more products of Unique Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree