All Categories
History
Response Rate
100.0%
Response Time
50.2hours
Product
Liquid bath thermal shock deviceHandling Company
ESPEC CORP.Categories
| Image | Part Number | Price (excluding tax) | Noise | Drive device | Power supply (±10% of rated voltage) | Mass | Sample movement time | Sample basket load capacity (uniformly distributed load) | Sample basket dimensions | Sample | Temperature range (high temperature bath) | Temperature range (cold chamber) | Temperature fluctuation (high temperature bath) | Temperature fluctuation (cold chamber) | Temperature fall time (high temperature bath) | Temperature fall time (low temperature chamber) | Temperature rise time (high temperature bath) | Temperature rise time (cryogenic chamber) | Liquid temperature (high temperature bath) | Liquid temperature (low temperature chamber) | Method | Stirrer | Outer diameter (mm) | Heater | Condensing circuit | Cooler | Refrigerator unit | Brine used | Low temperature chamber and constant temperature chamber method | Brine recovery circuit | Number of cycles | Exposure time |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
TSB−22 |
Available upon quote |
65dB or less |
Horizontal and vertical movement pneumatic drive type |
AC200V, 3φ, 3W, 50/60Hz |
Approximately 650kg |
Within 10 seconds (transfer time between high temperature chamber and low temperature chamber) |
1.0kg |
W120×H150×D120mm (approx. 2.1L) |
Plastic mold IC 1.0kg |
+70℃~＋200℃ |
-65℃~0℃ |
±2℃ |
±2℃ |
+150℃~+60℃ within 70 minutes |
Ambient temperature ~-65℃ within 120 minutes |
Ambient temperature ~+150℃ within 90 minutes |
−65℃~0℃ within 60 minutes |
+150℃ (Galden D02−TS) |
−65℃ (Galden D02−TS) |
Two-liquid tank system with moving sample basket |
2 units (1 each for high temperature tank and low temperature tank) |
W1,140×H1,785×D1,240 |
Sheathed heater |
Method: Condensation using a refrigerator |
Cooling tube coil |
Refrigeration method: Mechanical dual refrigeration method (air-cooled condenser) |
One-part or two-part fluorinated inert liquid |
W260×H350×D440mm (approx. 40L) |
Method: Condensation recovery by refrigerator cooling |
15 cycles |
High and low temperature for 5 minutes each |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
