All Categories

History

Rapid temperature change chamber-TCC−151W
Rapid temperature change chamber-ESPEC CORP.

Rapid temperature change chamber
ESPEC CORP.

ESPEC CORP.'s Response Status

Response Rate

100.0%

Response Time

50.2hours


About This Product

■Equipment overview

・Rapid temperature change chamber perfectly suited to handle rapid temperature changes to samples, from JEDEC standards to screening. ・Built-in web application that allows you to operate the tester from a computer or tablet device ・You can check the status of the tester on the web browser screen. ・Sample temperature load is uniform and temperature change rate with excellent reproducibility ・Sample temperature ramp control ・Compatible with JEDEC standard (JESD22-A104F) standard testing ・Supports sample temperature control and air temperature control

■Highly reproducible lamp control

TCC's sample temperature ramp operation allows you to control the ramp rate when the temperature rises and falls, making the strain waveform symmetrical. Additionally, even if the amount of sample changes, the test can be performed at the same ramp rate each time, keeping the strain rate constant. Tests can be performed with extremely high reproducibility.

■Compatible with JESD22-A104F standard test

Standard tests with a sample temperature ramp rate of 15°C/min or less (−40 to +125°C) can be performed easily and accurately. Ideal for automotive testing standards, life evaluation of solder joints, and reliability evaluation of semiconductor devices and semiconductor packages. Typical test standards: IEC60749-25, JESD22-A104F Minimizes the temperature difference within the chamber and applies a uniform temperature load to the sample.

■3 types of driving modes

Program operation that sets the temperature and time for each step, cycle operation that cycles between high and low temperatures, and constant temperature operation are possible.

■Improve workability with wiring on both sides

・Equipped with long cable holes (φ 25 x 100 mm) on the left and right sides for easy wiring of flat cables. ・You can access the inside of the tank from both sides. ・The inside of the tank measures W800 x H500 x D400mm, and has a large capacity of 160L. *If you place a B5 size board upright, you can insert approximately 60 boards. The door with integrated instrumentation allows the inner tank to be used as effectively as possible.

■Samples can be taken in and out during the test.

You can pause the cycle after completing any cycle. Samples can be taken in and out during the test, which saves time due to ai-nori tests. The temperature inside the tank during a temporary stop can be set in advance to either maintain the cycle operation set temperature or return to room temperature using the controller.

  • Product

    Rapid temperature change chamber

Share this product


40+ people viewing

Last viewed: 10 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Rapid temperature change chamber

Image Part Number Price (excluding tax) Noise Power supply voltage Piping connection size Drivable range Mass Temperature control method Test tank capacity Sample Allowable heat generation load Load capacity Water supply pressure Temperature range (temperature change rate) Temperature range Temperature fluctuation Maximum current Maximum cooling water amount Performance Foreign law Compressor Heater Control target Refrigerant Cooler Freezing method Internal law Lamp control
Rapid temperature change chamber-Part Number-TCC−151W

TCC−151W

Available upon quote

65dB or less

AC200V 3φ 3W 50/60Hz (Power supply voltage fluctuation: ±10% of rated value)

Cooling water supply and drainage pipe: 32A Condensed water drainage pipe: Outer diameter φ17.3mm

Ambient temperature and humidity range: +5℃~+35℃/up to 75% rh
Cooling water temperature range: +5℃~+32℃

950kg

Equilibrium temperature control method (BTC system)

160L

None

8kW (tank temperature -20℃ or higher)

Shelf support support: up to 25kg in total
Sample basket: 5 kg per tier (uniformly distributed load)

0.2MPa~0.5MPa (2kg~5kg/cm2G)

-70℃, +180℃ setting
-45℃→+155℃

-70℃~+180℃

±0.5℃ (-70℃~+180℃ stable)

115A

4,100L/h (Reference water temperature: +25℃)

23℃/min

W1,000×H1,808×D1,915mm

Scroll type (7.5kW+7.5kW)

Nichrome strip wire heater (14kW)

Air

R404A・R23

Plate fin cooler

Mechanical dual compression refrigeration method (water-cooled condenser)

W800×H500×D400mm (effective space dimensions)

OFF

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Environmental Testers Products

Other products of ESPEC CORP.

Reviews shown here are reviews of companies.


View more products of ESPEC CORP.

About Company Handling This Product

Response Rate

100.0%


Response Time

50.2hrs

Company Overview

ESPEC CORP., founded in 1947 and based in Osaka, Japan, is a manufacturer of environmental test chambers, list...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree