All Categories
History
Product
Perurethane Epoxy resin for prototype model NM-300A/NM-300BHandling Company
Pelnox| Image | Part Number | Price (excluding tax) | Properties after curing: Impact strength | Characteristics after curing Deflection temperature under load | Properties after curing Hardness | Characteristics after curing Appearance of cured product | Properties after curing Flexural modulus | Properties after curing: Bending strength | Properties before curing Mixing ratio | Properties before curing Viscosity | Properties before curing Mixed viscosity | Properties before curing Specific gravity | Properties before curing Maximum exothermic temperature | Properties before curing Appearance | Properties before curing Pot life | Condition before curing Gel time | Purpose | Standard curing conditions | Packing form | Function | Category |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
NM-300A |
Available upon quote |
JIS K-7110 Izod V-notch: 11kJ/m2 |
JIS K-7191 Load 1.8MPa: 74℃ |
JIS K-7215 25℃：83 (shore D) |
Visual inspection: yellow transparent |
JIS K-7171: 2,430MPa |
JIS K-7171: 100MPa |
Weight ratio: 100/33 |
25℃: 750mPa・s |
25℃: 240mPa・s |
25℃: 1.16 |
・25℃, 100g: -℃ |
Visual observation: pale yellow liquid |
・25℃, 100g: -min |
25℃, 100g: 220min |
Prototype model |
25℃-24hour＋80℃-2hour |
17kg |
Heat resistance |
Epoxy resin for prototype model |
Reviews shown here are reviews of companies.
