Perurethane Urethane resin for prototype model MU-891A/B/C
Pelnox
About This Product
Model resin for vacuum casting. Soft rubber type (hardness variable).
■Features
・White and black polyurethane rubber
・A hardness 90 with A/B combination
・A hardness can be adjusted from 20 to 80 by combining A/B/C
・Can be demolded at 60℃ for 60 minutes
・No surface tack even on molded products with A hardness of 20
■Applications
Model resin for vacuum casting
■Packaging form
MU-891A: 1Kg
■How to use
・Urethane resin foams due to moisture. Be careful of moisture while working.
・Ingredients may separate or the filler may settle. Stir well before use.
・Calculate the required A and B agents from the compounding ratio listed in the product information.
・Measure part A and part B into a polycup, etc. Do not use paper cups as they contain water.
・Mix Part A and Part B well. Please use a stirrer or spatula for stirring.
・When stirring, make sure to thoroughly stir all the way to the corners and bottom of the cup.
- Immediately defoam the mixture after stirring. Insufficient defoaming may cause foaming.
・Pouring or applying the mixed solution. Heat the base material and case and dry them thoroughly. This may cause foaming.
・Cure under the specified curing conditions.
■A liquid: 100, B liquid: 100, C liquid: 0
・Pot life: 5'30
・Mix viscosity (mPa・：330
・Demolition time (minutes): 60
・Hardness (Shore: 90
・Tensile strength (MPa): 17
・Elongation (%): 270
・Tear strength (N/mm: 34
■A liquid: 100, B liquid: 100, C liquid: 20
・Pot life: 5'30
・Mix viscosity (mPa・：310
・Demolition time (minutes): 60
・Hardness (Shore: 80
・Tensile strength (MPa): 12
・Elongation (%): 260
・Tear strength (N/mm: 27
■A liquid: 100, B liquid: 100, C liquid: 50
・Pot life: 5'10
・Mix viscosity (mPa・：280
・Demolition time (minutes): 60
・Hardness (Shore: 70
・Tensile strength (MPa): 8
・Elongation (%): 230
・Tear strength (N/mm：20
■A liquid: 100, B liquid: 100, C liquid: 90
・Pot life: 5'20
・Mix viscosity (mPa・：260
・Demolition time (minutes): 60
・Hardness (Shore: 60
・Tensile strength (MPa): 6
・Elongation (%): 290
・Tear strength (N/mm: 16
-
Product
Perurethane Urethane resin for prototype model MU-891A/B/C
-
Handling Company
Pelnox
-
Categories
1 Models of Perurethane Urethane resin for prototype model MU-891A/B/C
| Product Image | Part Number | Price (excluding tax) |
|---|---|---|
|
|
MU-891A |
Available upon quote |
Customers who viewed this product also viewed
![[Low sliding belt] Low μ tooth surface cloth-covered belt/NOK-Daiki Sangyo Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/30025892024051322.png)
Other products of Pelnox
View more products of Pelnox
About Company Handling This Product
- Japan