Perurethane Urethane resin for prototype model MU-884A/MU-884B-MU-884A

Perurethane Urethane resin for prototype model MU-884A/MU-884B
Pelnox

Pelnox's Response Status

Response Rate

100.0%

Response Time

144.8hours

About This Product

Model resin for vacuum casting. High heat resistance.

■Features・Two-component mixed type (liquid resin and liquid curing agent) polyurethane resin product.
・High heat resistance
・Special curing mechanism: Isocyanurate curing

■ApplicationsModel resin for vacuum casting

■Packaging formMU-884A: 1kg

■How to use・Urethane resin foams due to moisture. Be careful of moisture while working.
・Ingredients may separate or the filler may settle. Stir well before use.
・Calculate the required A and B agents from the compounding ratio listed in the product information.
・Measure part A and part B into a polycup, etc. Do not use paper cups as they contain water.
・Mix Part A and Part B well. Please use a stirrer or spatula for stirring.
・When stirring, make sure to thoroughly stir all the way to the corners and bottom of the cup.
- Immediately defoam the mixture after stirring. Insufficient defoaming may cause foaming.
・Pouring or applying the mixed solution. Heat the base material and case and dry them thoroughly. This may cause foaming.
・Cure under the specified curing conditions.

Model
There are 1 models for this product.

Product
Perurethane Urethane resin for prototype model MU-884A/MU-884B

Handling Company
Pelnox

Categories

Polymeric Materials

Urethane Resins

60+ people viewing

Last viewed: 8 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Perurethane Urethane resin for prototype model MU-884A/MU-884B

Image	Part Number	Price (excluding tax)	Properties after curing: Impact strength	Characteristics after curing Deflection temperature under load	Characteristics after curing Linear expansion coefficient	Properties after curing Hardness	Characteristics after curing Specific gravity of cured product	Characteristics after curing Appearance of cured product	Characteristics after curing Curing conditions	Characteristics after curing Thermal conductivity	Properties after curing Flexural modulus	Properties after curing: Bending strength	Properties after curing Tensile modulus	Properties after curing: Tensile strength	Characteristics after curing Shrinkage rate	Properties after curing: Elongation rate	Properties before curing Mixing ratio	Properties before curing Viscosity	Properties before curing Specific gravity	Properties before curing Appearance	Properties before curing Pot life	Purpose	Standard curing conditions	Packing form	Function	Category
	MU-884A	Available upon quote	JIS K-7110 Izod V with notch: 14kJ/m2	JIS K-7191 Load 1.8MPa: 105℃, 120℃ (post-cure 110℃ x 60 minutes), 147℃ (further post-cure 130℃ x 60 minutes)	TMA method: 12.1 x 10^-5/℃	ASTM D-2240 25℃: 80 (Shore D)	JIS K-7112 25℃: 1.21	Visual: light brown	70℃ -60 minutes curing	0.23W/mK	JIS K-7171: 1,200MPa	JIS K-7171: 60MPa	JIS K-7113: 1,224MPa	JIS K-7113: 47MPa	T=4 Internal standard: 0.5%	JIS K-7113: 43%	・Weight ratio: 100/400 ・Volume ratio: 100/350	25℃: 200mPa・s	25℃: 1.01	Visual inspection: colorless and semi-transparent	25℃, 100g: 4 minutes 45 seconds	Prototype model	・Liquid temperature: 25℃~30℃, mold temperature: 70℃ ・Curing: 70℃-60 minutes	1kg	Heat resistance	Urethane resin for prototype model

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Pressure-resistant and waterproof resin Jellafin®

Avia Corporation Ltd.

70+ people viewing

Last viewed: 19 minutes ago

Urethane Resins

2 models listed

Urethane coat MR7LINE

Mizoguchi Co., Ltd.

200+ people viewing

Last viewed: 44 seconds ago

Urethane Resins

12 models listed

The construction is easy and speedy urethane foam

Kansai Patate Kako Co., Ltd.

4.0

380+ people viewing

Last viewed: 12 minutes ago

Response time: 7.41 hours

Urethane Resins

3 models listed

Ceiling material uretampate that is dried quickly and has no jar

Kansai Patate Kako Co., Ltd.

4.0

330+ people viewing

Last viewed: 2 minutes ago

Response time: 7.41 hours

Urethane Resins

3 models listed

Clean cushion (with urethane)

MCC Co., Ltd.

70+ people viewing

Last viewed: 13 minutes ago

Response time: 22.47 hours

Urethane Resins

3 models listed

Cebuzasbio Masurethane Film / Hot Melt Film Environmentally Consideration Series

Seadam Co., Ltd.

260+ people viewing

Last viewed: 9 minutes ago

Response time: 15.87 hours

Urethane Resins

4 models listed

[Low sliding belt] Low μ tooth surface cloth-covered belt/NOK

Daiki Sangyo Co., Ltd.

140+ people viewing

Last viewed: 10 hours ago

Response time: 14.39 hours

Urethane Resins

3 models listed

Line paint line paint TXF

Taisei Fine Chemical Co., Ltd.

70+ people viewing

Last viewed: 18 minutes ago

Response time: 171.59 hours

Urethane Resins

2 models listed

Bulcolan processed products

OS Polymer Co., Ltd.

110+ people viewing

Last viewed: 15 minutes ago

Urethane Resins

3 models listed

Urethane waterproof top EX glossy

Taisei Fine Chemical Co., Ltd.

70+ people viewing

Last viewed: 14 minutes ago

Response time: 171.59 hours

Urethane Resins

3 models listed

Urethane 90° processed product

OS Polymer Co., Ltd.

80+ people viewing

Last viewed: 1 minute ago

Urethane Resins

3 models listed

Urethane waterproof top EX glossy heat shielding

Taisei Fine Chemical Co., Ltd.

80+ people viewing

Last viewed: 21 minutes ago

Response time: 171.59 hours

Urethane Resins

3 models listed

See More Urethane Resins Products

Other products of Pelnox

Reviews shown here are reviews of companies.

Pelnox <Epoxy sealing resin for electronics> Resin for light emitting diodes ME-5000

Pelnox

50+ people viewing

Last viewed: 18 hours ago

Response time: 144.76 hours

Pelnox <Epoxy sealing resin for electronics> Resin for light emitting diodes ME-512-1B/HV-512

Pelnox

50+ people viewing

Response time: 144.76 hours

Pelnox <Epoxy sealing resin for electronics> Resin for light emitting diodes ME-522-1C/HV-522

Pelnox

40+ people viewing

Response time: 144.76 hours

Pelnox <Epoxy sealing resin for electronics> Resin for light emitting diodes ME-540/HV-540

Pelnox

30+ people viewing

Last viewed: 18 hours ago

Response time: 144.76 hours

Pernox <Epoxy sealing resin for electronics> Visible light cutting dye for light emitting diodes (LEDs)

Pelnox

50+ people viewing

Response time: 144.76 hours

Pelnox <Epoxy sealing resin for electronics> Resin for semiconductors ME-255 TYPE T/HV-125 TYPE T

Pelnox

30+ people viewing

Last viewed: 18 hours ago

Response time: 144.76 hours

Pelnox <Epoxy sealing resin for electronics> Resin for semiconductors ME-268 TYPE D/HV-110 TYPE D

Pelnox

90+ people viewing

Last viewed: 19 hours ago

Response time: 144.76 hours

Pelnox <Epoxy sealing resin for electronics> Resin for semiconductors ME-269 TYPE T/HV-112 TYPE T

Pelnox

60+ people viewing

Last viewed: 18 hours ago

Response time: 144.76 hours

Pelnox <Epoxy sealing resin for electronics> Resin for semiconductors ME-272 TYPE F/HV-136

Pelnox

50+ people viewing

Last viewed: 7 hours ago

Response time: 144.76 hours

Pelnox <Epoxy sealing resin for electronics> Resin for semiconductors ME-274/HV-134

Pelnox

40+ people viewing

Last viewed: 14 hours ago

Response time: 144.76 hours

Pelnox <Epoxy sealing resin for electronics> Resin for semiconductors ZC-206

Pelnox

50+ people viewing

Last viewed: 18 hours ago

Response time: 144.76 hours

Pelnox <Epoxy sealing resin for electronics> One-component resin XM-5866

Pelnox

40+ people viewing

Response time: 144.76 hours

View more products of Pelnox

About Company Handling This Product

Pelnox

Response Rate

100.0%

Response Time

144.8hrs

Company Overview

Pelnox, Ltd., established in 1970 and located in Hadano, Kanagawa Prefecture, Japan, is a manufacturer and sup...

Japan

Perurethane Urethane resin for prototype model MU-884A/MU-884B Pelnox

Pelnox's Response Status

About This Product

■Features

■Applications

■Packaging form

■How to use

1 Models of Perurethane Urethane resin for prototype model MU-884A/MU-884B

MU-884A

Customers who viewed this product also viewed

Other products of Pelnox

About Company Handling This Product

Related search keywords

Perurethane Urethane resin for prototype model MU-884A/MU-884B
Pelnox