All Categories

History

Conductive to insulating viscous liquid and powder capacitive level switch QH type, QS type, SH type-QH type: High frequency absorption automatic correction/series resonance type (adhesion resistant type)
Conductive to insulating viscous liquid and powder capacitive level switch QH type, QS type, SH type-Irie Co., Ltd.

Conductive to insulating viscous liquid and powder capacitive level switch QH type, QS type, SH type
Irie Co., Ltd.

Irie Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

14.5hours

Relatively Fast Response


About This Product

■A wide range of variations, from inexpensive mass-produced models to specially designed products. Capacitive level switch ideal for detecting insulating high viscosity liquids and insulating resin powder.

・Measurement target: Conductive to insulating viscous liquid and powder ・QH type: High frequency absorption automatic correction ・Series resonance type (adhesion resistant type) ・QS type: Ultra-high sensitivity/parallel resonance type (antistatic type) ・SH type: Intrinsically safe explosion-proof structure ExiaII CT5 (TIIS), flameproof explosion-proof structure (ATEX)

■QH, SH type

・Can detect both conductive and insulating objects. - "Automatic correction function" that avoids malfunctions caused by adhesion or accumulation of conductive objects. -Sensitivity can be set by simply turning the sensitivity dial. In addition, a detection sensitivity switch allows measurement over a wide range. ・Uses nitrogen-filled relay. ・Long life as there is no driving part. ・Φ60 small head case. (Made of SUS, aluminum)

■QS type

-Uses an ultra-high sensitivity amplifier, making it suitable for measuring highly insulating materials. - "Separate type" for tanks installed in high places or narrow spaces can be adjusted from the panel side while watching the meter attached to the amplifier side. - Easy centralized management on the control panel side. ・Complete measures against power supply voltage fluctuations. - Strong against vibration. -Sensitivity can be set according to the object to be measured by simply turning the SET volume.

■Other specifications

・Ideal for detecting insulating high viscosity liquids and insulating resin powder. ・High degree of freedom in designing the detection unit. Depending on the site conditions, we can manufacture small, high-strength, flat, pipeline, etc. detection parts. ・The product underwent high pressure gas equipment testing on its own. *Note 1 ・Amp-integrated explosion-proof construction (ATEX). ・The effect of static electricity can be almost ignored. *Note 2 - The sensor board has an operation display LED, making it easy to confirm operation on site. *Note 1: We can also prepare only the documents required for the KHK examination (strength calculation sheet, test report, mill sheet). *Note 2: When the contents of the tank are charged with static electricity, the static electricity flows from the detection electrode of the level switch to the ground electrode, and from the mounting flange or mounting screw to the tank ground. If a ground line can be wired, it can also be run through the ground wiring. This is very effective in preventing static electricity explosions.

■Applications

・Liquid surface, powder surface, interface, liquid separation, foam surface ・Liquid level detection ignoring bubbles

  • Product

    Conductive to insulating viscous liquid and powder capacitive level switch QH type, QS type, SH type

Share this product


40+ people viewing

Last viewed: 9 minutes ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Conductive to insulating viscous liquid and powder capacitive level switch QH type, QS type, SH type

Image Part Number Price (excluding tax) Pressure resistance Measurement object Standard mounting dimensions Highest detection ability Wetted parts material Working principle Output Input power Operating temperature Sanitary specifications Amplifier sensitivity
Conductive to insulating viscous liquid and powder capacitive level switch QH type, QS type, SH type-Part Number-QH type: High frequency absorption automatic correction/series resonance type (adhesion resistant type)

QH type: High frequency absorption automatic correction/series resonance type (adhesion resistant type)

Available upon quote

Maximum 25MPa (possible by individual design)

Insulating powder ~ High viscosity conductive liquid Conductive liquid

Flange JIS5K/25A, 1”PT screw, IDF ferrule (1.5S, 2S), etc.

0.5pF 3pF~2Ω

SUS304, SUS316, SUS316L, PVC, heat-resistant PVC, Teflon, FRP, FEP, PFA, titanium, Hastelloy B, Hastelloy C276, nickel, tantalum, ceramic, etc.

It consists of an oscillation circuit and a detection section. Since the capacitance of the object to be measured and the air are significantly different, the change in capacitance due to contact with liquid or powder is converted into an electrical signal, which activates the relay.

Relay contact (AC250V / DC30V, 5A), transistor

Integrated or separate type AC105V/210V (±10%) 50/60Hz, DC24V

Maximum 500℃ (possible by individual design)

Equivalent to #400 buffing Electrolytic polishing Passivation treatment Anti-condensation treatment IDF sanitary ferrule/sheet/nut installation

X: High sensitivity B: Wide range sensitivity

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Level Switches Products

Other products of Irie Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Irie Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

14.5hrs


Company Review

4.8
  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree