All Categories

History

Absorption chiller/heater direct-fired dual-effect pack type (integrated cooling tower) SIGMA MIDY MP type MP-70 (standard/gas fired)-MP-70 (Standard/Gas fired)
Absorption chiller/heater direct-fired dual-effect pack type (integrated cooling tower) SIGMA MIDY MP type MP-70 (standard/gas fired)-Kawaju Refrigeration Industry Co., Ltd.

Absorption chiller/heater direct-fired dual-effect pack type (integrated cooling tower) SIGMA MIDY MP type MP-70 (standard/gas fired)
Kawaju Refrigeration Industry Co., Ltd.


About This Product

Features of absorption chiller/heater/freezer

■Diverse thermal energy use

In addition to fuels (gas, oil), various types of thermal energy can be used, such as waste heat from gas engines, steam, and natural solar heat.

■Peak cut

Since thermal energy is the main power, electricity consumption during operation is small. In general, the amount of electricity used for air conditioning tends to increase in the summer, but since absorption chiller/heaters and refrigerators consume less electricity, it is possible to cut peak electricity consumption in the summer.

■Gas/oil switching exclusive firing

Since it can use stockpiled fossil fuels, it can also be used as a BCP measure for hospitals and public facilities that need to operate even in the event of a disaster. Product overview

■High efficiency and cost reduction through combustion proportional control

By proportionally controlling combustion according to load conditions, the chilled water temperature can be stabilized, resulting in energy savings and high efficiency.

■Low NOx burner that reduces environmental impact

Low NOx burner suppresses NOx emissions. Certified by the Ministry of the Environment as a product that contributes to reducing environmental impact (equipment compliant with the Green Purchasing Law).

■Heavy load standard support and thorough warranty system

Supports heavy loads (more than 4000 hours of cooling per year) as standard. In addition, by signing an annual maintenance contract, we provide a long-term warranty (up to 7 years, an industry first)

■Pack type

An absorption chiller/heater, cooling tower, chilled water pump, and cooling water pump can be installed as one unit.

■Supports separate delivery

It is possible to divide the cargo into two parts when it is difficult to turn the route or pass through the delivery entrance.

■Heating capacity

standard, extra large

  • Product

    Absorption chiller/heater direct-fired dual-effect pack type (integrated cooling tower) SIGMA MIDY MP type MP-70 (standard/gas fired)

Share this product


40+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Absorption chiller/heater direct-fired dual-effect pack type (integrated cooling tower) SIGMA MIDY MP type MP-70 (standard/gas fired)

Image Part Number Price (excluding tax) High head power supply current (50Hz/60Hz) A High head power supply capacity (50Hz/60Hz) kVA High head Wiring thickness mm2 High head Total motor output during heating (50Hz/60Hz) High head Total motor output during cooling (50Hz/60Hz) Electricity power supply Capacity Heating kW (Mcal/h) Capacity Cooling kW (USRT) Fuel consumption Gas (cooling/heating) m3N/h (kW) Hot water inlet temperature - outlet temperature °C Total motor output during standard head heating (50Hz/60Hz) Total motor output during standard head cooling (50Hz/60Hz) Standard head Power supply current (50Hz/60Hz) A Standard lift power capacity (50Hz/60Hz) kVA Standard lift Wire thickness mm2 Connection size Absorption chiller/heater fuel inlet A Connection size Absorption chiller/heater cold/hot water inlet/outlet A Connection size Cooling tower automatic water supply A Connection size Cooling tower manual water supply A Connection size Cooling tower drain A Connection size Cooling tower overflow A Required supply pressure kPa Cold and hot water flow m3/h Cold and hot water pressure loss kPa Amount of cold and hot water held m3 Chilled water inlet temperature - outlet temperature °C Pump high head Motor output kW Pump high head External head (50Hz/60Hz) Pump standard head Motor output kW Pump standard head External lift (50Hz/60Hz)
Absorption chiller/heater direct-fired dual-effect pack type (integrated cooling tower) SIGMA MIDY MP type MP-70 (standard/gas fired)-Part Number-MP-70 (Standard/Gas fired)

MP-70 (Standard/Gas fired)

Available upon quote

74.5/71.3

25.2/24.1

30

9.30/9.30kW

17.15/17.15kW

200V, 3Φ

199 (171)

246 (70)

13A gas
17.9/18.5 (224/231)

55.6 → 60.0

7.30/7.30kW

15.15/15.15kW

68.5/65.3

23.2/22.0

30

32

80

15

15

15

50

1.96

38.5

42.5

0.091

12.5 → 7.0

7.5

317.6/275.0

5.5

227.5/222.1kPa

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More HVACs Products

Other products of Kawaju Refrigeration Industry Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Kawaju Refrigeration Industry Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree