Brass back seat type filling valve for general high pressure gas piping (angle type, 4mm) G-12 type
Hamai Co., Ltd.
About This Product
■Filling source valve for general high pressure gas piping with seat diameter 4mm
Made of brass. Back seat type filling valve (angle type) for general high pressure gas piping with a seat diameter of 4 mm.
■Specs
・Seat diameter: 4mm
・Connection screw: [IN] W22 thread 14, [OUT] W22 thread 14
・Normal pressure: 17MPa/25MPa/27MPa
・Reference CV value: 0.35
■Specifications
・Made of brass
・Flammability
・Nonflammable
・Flame support
■Features
・Back seat type filling source valve for general high pressure gas piping.
・C3771 brass material is used for the valve body.
・A wide variety of products are available, including minister-certified products (maximum working pressure 25MPa), outlet screw W22 left, pressure gauge main valve, and Cr-plated specifications.
■Precautions when handling the product: When installing piping
- Use valves that meet the specifications of the high-pressure gas equipment: Check the pressure test pressure and design pressure.
・Make sure that the threads and sealing surfaces of valves and piping joints are in good condition: Note) Please be careful as this may cause leakage or galling. Make sure that there are no harmful scratches on the screws. Be careful not to leave scratches, dents, etc. on the piping connection seal surface. Make sure that there is no foreign matter attached to the piping connection seal surface.
・Pay attention to the direction of fluid flow and connect in the appropriate direction: Check with the arrow mark on the valve body. For valves without arrows, check the structure in the product drawing and connect in the appropriate direction.
・Avoid bending, distortion, or diagonal piping: Connect so that the valve connection thread and the center of the piping match.
■Precautions when handling the product: When opening and closing the valve
・Do not handle roughly: Turn the handle clockwise to close it, and turn it counterclockwise to open it. Operate slowly and quietly by hand. Please do not apply sudden pressure.
・Do not apply excessive torque: Tighten firmly by hand. Do not apply excessive force using tools etc.
■Precautions when handling the product: When disassembling and repairing
Perform disassembly and repair in an appropriate manner: Perform disassembly and repair in an unpressurized state. Please use appropriate tools etc.
-
Product
Brass back seat type filling valve for general high pressure gas piping (angle type, 4mm) G-12 type
-
Handling Company
Hamai Co., Ltd.
-
Categories
1 Models of Brass back seat type filling valve for general high pressure gas piping (angle type, 4mm) G-12 type
| Product Image | Part Number | Price (excluding tax) |
|---|---|---|
|
|
G-12 Filling valve |
Available upon quote |
Customers who viewed this product also viewed
Other products of Hamai Co., Ltd.
View more products of Hamai Co., Ltd.
About Company Handling This Product
- Japan