This product is registered by Yuhara Co., Ltd..
About This Product
Road marking spray Asahipen
■Product features
・It dries quickly and does not smudge even when applied to asphalt.
- Easily draw lines on asphalt, concrete, etc. using a spray liner.
・Since it can be sprayed by hand without using a spray liner, it can also be used for marking.
- Comes with a gas vent cap that can be easily and safely disposed of after use.
■Maintenance of equipment
When finished using tools, wash them with lacquer thinner before the paint dries.
■Substrate treatment, etc.
・Remove sand, dirt, oil, and dust from the surface to be painted.
・Cover any areas that may be prone to getting paint with masking tape or curing sheets in advance.
・When applying to new concrete or mortar, wait at least one month after construction.
■How to use
・Remove sand, dirt, oil, etc. from the surface to be painted.
・Cover any areas where you don't want paint to get on them with masking tape, etc. Use masking tape to surround the surface to be painted for a more beautiful finish.
・When using, shake the container thoroughly (approximately 30 seconds after you hear the sound of the stirring bulb) to mix well. Shake occasionally during use to mix contents well.
- When spraying paint, leave a distance of 10cm between the surface to be painted and the spout, and press the "push" part of the button. When using a spray liner, please read the instructions on the spray liner case carefully.
- Test coat on an inconspicuous area and carefully check the color, spray condition, drying properties, effect on the base, adhesion, etc. to make sure there are no abnormalities before applying.
・This spray is only for upside down spray. After use, to avoid clogging the spout or disturbing the line width, be sure to hold the container facing upwards, place a rag, etc. on top of the spout, blow dry for about 2 seconds, wipe the spout thoroughly, and then replace the cap. I will.
-
-
Product
Spray for road marking
Share this product