All Categories

History

Undercoat guards for rust prevention and oval prevention guards 101P-101P 1kg
Undercoat guards for rust prevention and oval prevention guards 101P-101p 4kg
Undercoat guards for rust prevention and oval prevention guards 101P-Tomoe Corporation

Undercoat guards for rust prevention and oval prevention guards 101P
Tomoe Corporation


About This Product

Guard Septer 101P is a rust -proof undercoat coating made from a modified polyurethane resin with water as a curing agent. Guard Septer 101P is a very well -permitted liquid, so it cracks the rust layer, a hollow, and the water that has penetrated into the crystal grain field deep penetrates deep into the iron skin, reacts with a water molecule, releases it as a CO2 gas, fixes rust as it is, and forms a strong polyurethane inert film. It gives a rust prevention effect.

■ Characteristics

・ Because it can be applied directly from the rust, it is very economical because the rust dropping of the most effort and time (expenses) can be saved into large widths. ・ Use for top coating. All commercial paints can be used according to the purpose. ・ Due to quick drying, the time required for paint work can be greatly reduced. ・ The hardened film is hard and is not easily violated by any solvent. Therefore, it is safe for hygiene. ・ It is effective not only for rust prevention of metal, but also for enhancing and waterproofing of concrete floors and wood that has become brittle after deterioration.

■ Use

・ Factory facilities, oil tanks, bridges, railway facilities, ships, plants, port facilities, steel, steel, steel, pier, pier, agricultural facilities, agricultural facilities, agricultural shops, livestock facilities, livestock facilities, paper products, large and small cars, and all other steel facilities. Use all steel products in living space, such as veranda, gate, fence, roof, iron door, bicycle, iron stairs, handrails, shutters, etc.

  • Product

    Undercoat guards for rust prevention and oval prevention guards 101P

Share this product


450+ people viewing

Last viewed: 8 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of Undercoat guards for rust prevention and oval prevention guards 101P

Click on the part number for more information about each product

Image Part Number Price (excluding tax) capacity Moisturizing type urethane resin weight ratio (%) Mixed xylene weight ratio (%) Total weight ratio (%) Test performance drying time (finger touch drying) Test performance drying time (hardened drying) Exterior of the test results coating Test performance top coating compatibility Test performance resistance resistance Test performance water resistance Test performance salt water spray test Test performance alkaline resistance Test performance acid resistance
Undercoat guards for rust prevention and oval prevention guards 101P-Part Number-101P 1kg

101P 1kg

Available upon quote

1kg

50

50

100

2.0 hours * Standards / test methods: 23 ° C, 50 % RH

4.0 hours * Standards / test methods: 23 ° C, 50 % RH

Passed * Standards / test methods: The appearance of the coating is normal

Passed * Standards / test method: 23 ° C x 16 hours later, even if the top coat (guard sector GF coat) does not hinder

Passed * Standards / test methods: 40cm, 500g falling balls, do not come off

Passed * Standards / test methods: Water immersion 7 days coating does not have Fukure

Passed * Standards / test method: 5%saline spray 35 ° C, 48 hours rust is not generated

Passed * Standards / Test method: 5%sodium hydroxide water solution 7 days spot, no cracking in the coating film

Passed * Standards / test method: 5%sulfate 7 -day spot, no cracking in the coating film

Undercoat guards for rust prevention and oval prevention guards 101P-Part Number-101p 4kg

101p 4kg

Available upon quote

4kg

50

50

100

2.0 hours * Standards / test methods: 23 ° C, 50 % RH

4.0 hours * Standards / test methods: 23 ° C, 50 % RH

Passed * Standards / test methods: The appearance of the coating is normal

Passed * Standards / test method: 23 ° C x 16 hours later, even if the top coat (guard sector GF coat) does not hinder

Passed * Standards / test methods: 40cm, 500g falling balls, do not come off

Passed * Standards / test methods: Water immersion 7 days coating does not have Fukure

Passed * Standards / test method: 5%saline spray 35 ° C, 48 hours rust is not generated

Passed * Standards / Test method: 5%sodium hydroxide water solution 7 days spot, no cracking in the coating film

Passed * Standards / test method: 5%sulfate 7 -day spot, no cracking in the coating film

Click on the part number for more information about each product

Other products of Tomoe Corporation

Reviews shown here are reviews of companies.


View more products of Tomoe Corporation

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree