All Categories

History

Handheld Real-time Spectrum Analyzer (9kHz to 9GHz) 4024CA-4024CA
Handheld Real-time Spectrum Analyzer (9kHz to 9GHz) 4024CA-T&M Corporation Co., Ltd.

Handheld Real-time Spectrum Analyzer (9kHz to 9GHz) 4024CA
T&M Corporation Co., Ltd.

T&M Corporation Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

28.1hours

Relatively Fast Response


About This Product

■Summary

・Wide frequency range: from 9kHz to 9GHz ・Full band preamplifier configuration ・Low display average noise level: -163dBm@1HzRBW (typical value) ・Excellent RF specification performance ・Phase noise performance: -115dBc/Hz@100kHz frequency offset@1GHz carrier ・Input TOI point: +13dBm (typical value) ・Amplitude accuracy: ±1.3dB ・Real-time spectrum analysis function ・Supports persistence spectrum and waterfall display modes ・Maximum real-time analysis bandwidth: 120MHz ・5.8μs POI RTSA ・Resolution bandwidth: 1Hz to 10MHz (1/3 step), 20MHz ・512MHz IQ waveform capture ・Various measurement functions: spectrum analyzer, interference analyzer (spectrogram, RSSI), RTSA, 5GNR modulation release, LTEFDD/TDD modulation release, GSM/EDGE modulation release function, etc. ・Various intelligent measurement functions: field strength measurement, channel power, occupied bandwidth, adjacent channel power ratio, tune & listen, carrier-to-noise ratio, emission mask, Supports indoor/outdoor map measurement, GPS/BEIDOU positioning and frequency stabilization calibration function of crystal oscillator in machine ・Various auxiliary test interfaces: 10MHz reference input/output interface, GPS antenna interface, zero span IF output interface, external trigger input interface, etc.

■Sideband noise (carrier 1GHz, 20℃~30℃)

・≤-108dBc/Hz@Frequency offset 10kHz ・≤-110dBc/Hz@Frequency offset 100kHz ・≤-118dBc/Hz@Frequency offset 1MHz ・≤-129dBc/Hz@Frequency offset 10MHz Displayed average noise level (50Ω load at input, 0dB input attenuation, average detection, video type logarithmic, RBW normalized to 1Hz, 20°C to 30°C)

■Preamp off:

・≤-140dBm (2MHz~3GHz) ・≤-138dBm (3GHz to 9GHz)

■Preamp on:

・≤-160dBm (2MHz~3GHz) ・≤-157dBm (3GHz to 9GHz)

  • Product

    Handheld Real-time Spectrum Analyzer (9kHz to 9GHz) 4024CA

Share this product


100+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Handheld Real-time Spectrum Analyzer (9kHz to 9GHz) 4024CA

Image Part Number Price (excluding tax) Electromagnetic compatibility Power input format Weight (without batteries) Total level uncertainty Residual response (RF input matching, 0dB attenuation) Maximum safe input level External dimensions Frequency readout accuracy Frequency range Frequency reference Reference level Operating temperature Resolution bandwidth Overall power consumption (not including battery charging) Input attenuator Storage temperature Second harmonic distortion (attenuation 0dB, -30dBm input) Third-order intermodulation distortion Video bandwidth Battery run time Test port Span width Scan time Other interfaces
Handheld Real-time Spectrum Analyzer (9kHz to 9GHz) 4024CA-Part Number-4024CA

4024CA

Available upon quote

Compliant with the requirements of 3.9.1 of GJB 3947A-2009

AC power adapter: Input 220V (1±10%), 50Hz (1±5%), Output 15VDC, 4A
Lithium ion battery: 10.8V

≤4.6kg

±1.30dB (10MHz~9GHz)

Exception frequency: 3,150MHz
Front radiation device: ≤-82dBm (10MHz~9GHz)
Front radiation: ≤-95dBm (10MHz~9GHz)

+27dBm, typical value

314mm (width) x 217mm (height) x 91mm (depth) (excluding side handles, rear stand, etc.)

± (Frequency readout x Frequency reference error +2% x Span +10% x Resolution bandwidth)

9kHz~9GHz

Standard frequency: 10MHz
Aging rate: ±5×10^-7/year
Initial calibration accuracy: ±3×10^-7
Temperature stability: ±1×10^-7 (-10~50℃, 25±5℃ standard)

Range: -150dBm~+30dBm
Conversion error: ±1.20dB (reference level 0dBm~-60dBm)

-10℃~+50℃ (Battery operating temperature is 0℃~+45℃)

1Hz~10MHz (1-3 steps), 20MHz

≤40W

Attenuation range 0dB~30dB, 5dB steps

-40℃~+70℃ (Battery storage temperature is -20℃~+60℃)

≤-65dBc (50MHz~2GHz)
≤-70dBc (2GHz~4.5GHz)

≥+10dBm (50MHz~5.2GHz)
≥+12dBm (5.2GHz~9GHz)

1Hz~10MHz (1-3 steps), 20MHz

2 hours (standard value)

RF input: N type female connector

Range: 10Hz~9GHz or 0Hz
Accuracy: ±2.0%

Range: 1μs~6,000s (zero span)
Accuracy: ±2.00% (zero span)

10MHz reference input/output: BNC (female)
External trigger input: BNC (female)
IF output: BNC (female)
GPS antenna input: BNC (female)

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Spectrum Analyzers Products

Other products of T&M Corporation Co., Ltd.

Reviews shown here are reviews of companies.


View more products of T&M Corporation Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

28.1hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree