3SEP oil water separator
CBSI Corporation
About This Product
■Summary
JOWA oil/water separator uses gravity difference to separate emulsified oil with two filters. There are five types depending on processing capacity: 0.5m3/h, 1.0m3/h, 2.5m3/h, 5.0m3/h, and 10.0m3/h. The entire device is optimized so it does not take up any ground area.
■Function
It is designed with the concept of cyclical processing through automatic operation. No chemicals are required. In the first stage, the oil is removed by gravity under the action of the plates. The oil sensor controls the valve and automatically drains into the sludge tank or other tanks. With this oil sensor, the amount of oil discharged into the sludge tank can be minimized.
In the second stage, the emulsified oil is removed through two filter tanks and monitored with a bilge alarm to ensure it is discharged below 15 ppm. Oil accumulated at the top of the filter tank is automatically drained into the sludge tank.
If a reading above 15ppm is detected and an alarm is activated, the oil/water separator automatically avoids overboard discharge and recirculates the oil back to the bilge to keep it below 15ppm. If the value is below 15ppm, the valve for discharging overboard will automatically open again, without requiring any human intervention.
The entire device is integrated with a skid, and is designed to be easily connected to piping. When this device is delivered to the customer, basically all they need to do is connect it to the inlet/outlet and power source, allowing quick and easy installation. Before shipping, a quality test is conducted to confirm that there are no problems with each function, and devices that pass the test are shipped.
■Main features
・IMO MEPC (International Maritime Organization Marine Environment Protection Committee) 107 (49) Approved
・15ppm or less
・Separate regular oil and emulsified oil
・Cyclic processing by automatic operation
・No chemicals required
・Easy to install
・Small ground contact area
-High quality materials and parts
・Filter tank is AISI 316L (stainless steel)
・Easily connectable with JOWA's EBU (Emulsion Breaking Unit) that achieves 5ppm or less
・Wide range of processing capacity from 0.5 to 10m3/h
・Obtained various approvals (DNV, CCS, USCG, RMRS)
-
Product
3SEP oil water separator
-
Handling Company
CBSI Corporation
-
Categories
1 Models of 3SEP oil water separator
| Product Image | Part Number | Price (excluding tax) |
|---|---|---|
|
|
3SEP oil water separator |
Available upon quote |
Customers who viewed this product also viewed
Other products of CBSI Corporation
View more products of CBSI Corporation
About Company Handling This Product
- Japan