AC servo driver PMCE series (RoHS compliant) PMCE-2406/without case
Servo Techno Co., Ltd.
About This Product
■Summary
The PMCE series servo driver was developed to realize speed, torque (current), and positioning control at low cost. Commands can be pulse train input or analog input (torque control), but they can also be controlled using communication (USB).
You can also select an absolute encoder (specified by the manufacturer) or an incremental encoder.
Features
■Low price
By adopting a software servo, we have achieved versatility and achieved a low price.
■Small and lightweight
The PMCE series uses a single printed circuit board for the control and driver sections, making it smaller and lighter.
■Power supply
Power supply voltage: PMCE2406 (for DC24V), PMCE4810 (for DC24V to DC48V)
■High-speed, high-precision positioning
The high speed is 10MPPSmax (at 4 times the encoder), so it can be used with high-resolution encoders.
■Photo isolation
It has a built-in power supply for the encoder, and all interface sections are photo-isolated.
■2ch analog monitor output (standard) + current monitor output 0 to +5V
・Monitor contents: Current speed/position error/speed command/torque command + U-phase, W-phase motor current waveform
・Positioning is possible using photo-isolated communication (USB). Additionally, you can set the movement point in advance and perform positioning automatically.
- Adopts a shunt resistor for current detection, enabling more stable current control than the Hall sensor method when outputting a small current.
- Can be used by switching between position control and current control (torque control) using external I/O.
-
Product
AC servo driver PMCE series (RoHS compliant) PMCE-2406/without case
-
Handling Company
Servo Techno Co., Ltd.
-
Categories
1 Models of AC servo driver PMCE series (RoHS compliant) PMCE-2406/without case
| Product Image | Part Number | Price (excluding tax) | Absolute maximum voltage | Control feedback | Control loop | External dimensions | Function Input signal | Function Output signal | Function Protection function | Function indicator lamp | Insulation voltage | Interface power supply | Main circuit (drive method) | Maximum output | Operating temperature and humidity | Output circuit | Positioning | Power supply | Rated output | Speed accuracy | Speed, position control command input | Storage temperature, humidity | Thrust (torque) command input | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
PMCE-2406/No case |
Available upon quote | DC50V |
Incremental encoder (line driver compatible), Absolute encoder, resolver (optional) (A phase, B phase) |
Current control speed control position control |
70×80×15mm |
Servo on, alarm reset, gain low, Torque control, pole sensor (U,V,W) (Servo on (magnetic pole detection)) |
Alarm (over high temperature, overcurrent trip, full count, encoder error, overload) In-position, servo ready, encoder (A phase, B phase, Z phase) (Photocoupler insulation) |
Overcurrent, overvoltage, undervoltage, overheating, Encoder error, excessive position deviation, Built-in electronic thermal |
Power ON (POW), In position (INP), Alarm (7 segment display) |
DC500V1 minute between main circuit and case Main circuit/signal isolation voltage: 500V Isolated using a photocoupler type current sensor (Insulation voltage of built-in DC/DC converter 1,500V) |
DC+5V~+24V0.1A |
Power MOSFET, sine wave PWM (20KHz), Three-phase, reversible |
Voltage ±Vmax/rms20.7/14.6 Current ±Amax/rms7.9/5.6 (3Sec) |
Temperature: 0~+50℃ Humidity: 80%RH or less (No condensation) |
No reactor |
±1 pulse (4 times) |
DC24V (DC20~40V) 8A Main power supply/control power supply/encoder power supply is Each is insulated (Common main/control power supply) |
Voltage ±Vmax/rms20.7/14.6 Current ±Amax/rms3.0/2.1 (continuous) |
0.1% or less |
Forward/backward pulse method Pulse/direction method 2-phase pulse method (Photocoupler input) 10MPPS (Max) (When inputting A and B phases) |
Temperature: -20~+85℃ Humidity: 80%RH or less (No condensation) |
0~+10V (used in torque control mode) | 45g |
Customers who viewed this product also viewed
Other products of Servo Techno Co., Ltd.
View more products of Servo Techno Co., Ltd.
About Company Handling This Product
- Japan