Linear amplifier DC/AC servo driver LPV series LPVSA340A
Servo Techno Co., Ltd.
About This Product
■Summary
The LPVSA series was developed as a servo driver that uses an ultra-precision voice coil linear motor for high-speed positioning and switches to torque control to control pressing force.
For the position feedback signal, use a 2-phase encoder for A and B phases, and input a pulse train (or ±10V) to the position command input to perform ultra-high-speed positioning. After positioning is completed, switch to torque control, input ±10V from the torque command input, and control the pressing force with analog voltage.
Also, since analog signals can be input for positioning, it is also possible to control high-speed operation of the voice coil motor using the sine wave of the oscillator. Power control uses a linear amplifier system, achieving noiseless, high-speed response, and linear torque control, enabling ultra-precise positioning in nanometer units.
The frequency characteristics of the linear amplifier are DC to 20KHz when using a resistive load. The main circuit is a single-phase bridge configuration.
■Features
- Circuits that require high-speed processing are processed using analog calculations, and in order to eliminate problems with high resolution and noise, the position feedback signal is input as a two-phase encoder signal of A and B phases.
・Positioning commands can be either ±10V analog signals or CW or CCW pulse trains.
- Demonstrates quick response even to minute feeds.
・Very fast response due to no sampling control.
- High speed of 10MPPSmax, so it can be used with high-resolution encoders.
-No switching noise.
■Applications
Voice coil type linear motors, bonding wires, scanners, galvano mirrors, etc.
-
Product
Linear amplifier DC/AC servo driver LPV series LPVSA340A
-
Handling Company
Servo Techno Co., Ltd.
-
Categories
1 Models of Linear amplifier DC/AC servo driver LPV series LPVSA340A
| Product Image | Part Number | Price (excluding tax) | Command input | Control loop | Control method | Control power supply | Current frequency response | Encoder input | External dimensions (W×D×H) | Function Input signal | Function Output signal | Function Protection function | Function indicator lamp | Main circuit | Main power supply | Maximum output | Operating temperature and humidity | Position/current command input | Positioning | Power control method | Rated output | Storage temperature, humidity | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
LPVSA340A |
Available upon quote |
Analog command ±10V CW (PULS), CCW (DIR) (Maximum resolution: 16BIT) |
Current control speed control position control |
Based on digital/analog conversion method Deviation counter + analog calculation servo |
#ERROR! |
DC~20KHz or more (resistive load) |
2 phase incremental encoder line receiver input (Open collector available) |
113×270×72mm |
CW/PULS, CCW/DIR, servo on, stop, gain low, gain 0, Position control/current control switching, current control, alarm reset (Photocoupler input +5V) |
Alarm (over high temperature, overcurrent trip, full count) In-position, A phase, B phase, Z phase Photocoupler output (ABZ phase is AM26LS31 output) |
Overcurrent, FET overheating, Power supply abnormality, motor overheating |
Overcurrent trip (CUR), motor high temperature abnormality (TMP), Inposition (INP), Full Count (FC), Encoder error (Lights red) |
Single phase power FET bridge | DC48V (DC36V~76V) |
Voltage ±V46 Current ±A7 |
Temperature: 0~+50℃ Humidity: 85%RH or less (No condensation) |
Analog command ±10V |
±1 pulse (4 times) |
Linear amplifier |
Voltage ±V47 Current ±A3 |
Temperature: -20~+50℃ Humidity: 85%RH or less (No condensation) |
1,550g |
Customers who viewed this product also viewed
Other products of Servo Techno Co., Ltd.
View more products of Servo Techno Co., Ltd.
About Company Handling This Product
- Japan