All Categories

History

  1. Metoree
  2. Polymeric Materials
  3. PEEK Tubing
  4. Plastic for cutting processing Slidability PEEK TECAPEEK PVX black (Ensinger)
Plastic for cutting processing Slidability PEEK TECAPEEK PVX black-TECAPEEK PVX black 5MM
Plastic for cutting processing Slidability PEEK TECAPEEK PVX black-Ensinger

Plastic for cutting processing Slidability PEEK TECAPEEK PVX black
Ensinger

⚙️ Plastic & Rubber Manufacturing

Ensinger's Response Status

Response Rate

100.0%

Response Time

109.2hours

About This Product

■Summary

TECAPEEK PVX black is a PEEK sliding grade extrusion material made from Victrex® PEEK 450, comparable in performance to Victrex® PEEK™ FC30. TECAPEEK PVX black has been developed specifically for bearing and sliding applications. Based on PEEK, 10% each of PTFE, graphite, and carbon fiber are added. TECAPEEK PVX black has the lowest coefficient of friction and high wear resistance compared to other PEEK grades. It also provides relatively high dimensional stability even in high-temperature environments. Additionally, by reinforcing PEEK resin with carbon fiber or graphite, it is possible to ensure higher mechanical properties than regular unreinforced PEEK. In addition, TECAPEEK PVX improves thermal conductivity, allowing the frictional heat generated in the component to be dissipated as much as possible to avoid overheating damage. In particular, the carbon fiber and graphite in TECAPEEK PVX black help improve thermal conductivity. It also has a thermal conductivity that is more than three times that of additive-free PEEK. In sliding applications, the resistance to high PV loads is remarkable. PEEK PVX exhibits excellent tribological performance properties when combined with non-metallic materials, while also maintaining excellent chemical resistance. It can also be used in both dry and wet environments. TECAPEEK PVX black is designed for use in harsh environments with high stress loads and high speeds. It can be used in environments where it is continuously exposed to hot water or steam. Like all Ensinger PEEK materials, sliding grade TECAPEEK PVX black complies with the RoHS Directive (2011/65/EU: Restriction of hazardous substances in electrical and electronic equipment).

  • Product

    Plastic for cutting processing Slidability PEEK TECAPEEK PVX black

  • Usage Scenarios

    Plastic & Rubber Manufacturing

Share this product


70+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Plastic for cutting processing Slidability PEEK TECAPEEK PVX black

Image Part Number Price (excluding tax) Length (MM) Weight (KG/M) Color Specific gravity Minimum thickness tolerance (MM) Maximum thickness tolerance (MM) Types of plastic Size (MM)
Plastic for cutting processing Slidability PEEK TECAPEEK PVX black-Part Number-TECAPEEK PVX black 5MM

TECAPEEK PVX black 5MM

Available upon quote

3,000

0.034

Black color

1.44 g/cm3

+0,1

+0,7

PEEK (Polyetheretherketone)

5

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

High -performance / high -performance tube pipe ultra -fine tube / ultra -fine pipe series-Jinryu Kogyo Co., Ltd.

High -performance / high -performance tube pipe ultra -fine tube / ultra -fine pipe series

Jinryu Kogyo Co., Ltd.

390+ people viewing

Last viewed: 11 hours ago

Response time: 91.36 hours

PEEK Tubing

3 models listed

Plastic material for cutting PEEK natural TECAPEEK natural-Ensinger

Plastic material for cutting PEEK natural TECAPEEK natural

Ensinger

80+ people viewing

Last viewed: 22 minutes ago

Response time: 109.17 hours

PEEK Tubing

3 models listed

High -performance and high -performance tube pipe VICTREX® PEEK (polyeter ether keton) series-Jinryu Kogyo Co., Ltd.

High -performance and high -performance tube pipe VICTREX® PEEK (polyeter ether keton) series

Jinryu Kogyo Co., Ltd.

190+ people viewing

Response time: 91.36 hours

PEEK Tubing

3 models listed

Fitting union T connector for 1/16″ tube-Idea Manufacturing

Fitting union T connector for 1/16″ tube

Idea Manufacturing

5.0

430+ people viewing

Last viewed: 23 hours ago

Response time: 14.84 hours

PEEK Tubing

24 models listed

Plastic for cutting processing PTFE blended sliding blue PEEK TECAPEEK TF10 blue-Ensinger

Plastic for cutting processing PTFE blended sliding blue PEEK TECAPEEK TF10 blue

Ensinger

50+ people viewing

Response time: 109.17 hours

PEEK Tubing

3 models listed

Plastic for cutting processing Blue PEEK compatible with metal detectors TECAPEEK ID blue-Ensinger

Plastic for cutting processing Blue PEEK compatible with metal detectors TECAPEEK ID blue

Ensinger

60+ people viewing

Last viewed: 7 hours ago

Response time: 109.17 hours

PEEK Tubing

3 models listed

Excellent pressure resistance and drug resistant HPLC PEEK tube outer diameter 1/32 inch series-Jinryu Kogyo Co., Ltd.

Excellent pressure resistance and drug resistant HPLC PEEK tube outer diameter 1/32 inch series

Jinryu Kogyo Co., Ltd.

320+ people viewing

Last viewed: 22 hours ago

Response time: 91.36 hours

PEEK Tubing

8 models listed

Plastic for cutting processing Medical blue PEEK TECAPEEK MT blue-Ensinger

Plastic for cutting processing Medical blue PEEK TECAPEEK MT blue

Ensinger

60+ people viewing

Last viewed: 13 minutes ago

Response time: 109.17 hours

PEEK Tubing

3 models listed

Excellent pressure resistance and drug resistant HPLC PEEK tube outer diameter 1/16 inch series-Jinryu Kogyo Co., Ltd.

Excellent pressure resistance and drug resistant HPLC PEEK tube outer diameter 1/16 inch series

Jinryu Kogyo Co., Ltd.

350+ people viewing

Response time: 91.36 hours

PEEK Tubing

6 models listed

Resin tube High precision PEEK tube suitable for HPLC piping at an affordable price PEEK tube (1m)-Yagyu Shokai Co., Ltd.

Resin tube High precision PEEK tube suitable for HPLC piping at an affordable price PEEK tube (1m)

Yagyu Shokai Co., Ltd.

30+ people viewing

Last viewed: 5 hours ago

Response time: 2.69 hours

PEEK Tubing

2 models listed

Resin tube High precision PEEK tube suitable for HPLC piping at an affordable price PEEK tube (10m)-Yagyu Shokai Co., Ltd.

Resin tube High precision PEEK tube suitable for HPLC piping at an affordable price PEEK tube (10m)

Yagyu Shokai Co., Ltd.

30+ people viewing

Last viewed: 23 hours ago

Response time: 2.69 hours

PEEK Tubing

2 models listed

Resin tube Excellent pressure resistance, chemical resistance, and high dimensional accuracy PEEK tube for HPLC piping-Yagyu Shokai Co., Ltd.

Resin tube Excellent pressure resistance, chemical resistance, and high dimensional accuracy PEEK tube for HPLC piping

Yagyu Shokai Co., Ltd.

20+ people viewing

Last viewed: 23 hours ago

Response time: 2.69 hours

PEEK Tubing

2 models listed

See More PEEK Tubing Products

Other products of Ensinger

Reviews shown here are reviews of companies.

Plastic material for cutting PEEK natural TECAPEEK natural-Ensinger

Plastic material for cutting PEEK natural TECAPEEK natural

Ensinger

80+ people viewing

Last viewed: 22 minutes ago

Response time: 109.17 hours

PEEK Tubing

3 models listed

Plastic for cutting 30% glass fiber reinforced PEEK TECAPEEK GF30 natural-Ensinger

Plastic for cutting 30% glass fiber reinforced PEEK TECAPEEK GF30 natural

Ensinger

60+ people viewing

Last viewed: 12 minutes ago

Response time: 109.17 hours

Plastic Engineering Compounds

3 models listed

Plastic for cutting 30% carbon fiber reinforced PEEK TECAPEEK CF30 black-Ensinger

Plastic for cutting 30% carbon fiber reinforced PEEK TECAPEEK CF30 black

Ensinger

80+ people viewing

Last viewed: 9 minutes ago

Response time: 109.17 hours

Plastic Engineering Compounds

3 models listed

Plastic for cutting processing PTFE blended sliding blue PEEK TECAPEEK TF10 blue-Ensinger

Plastic for cutting processing PTFE blended sliding blue PEEK TECAPEEK TF10 blue

Ensinger

50+ people viewing

Response time: 109.17 hours

PEEK Tubing

3 models listed

Plastic for cutting processing Blue PEEK compatible with metal detectors TECAPEEK ID blue-Ensinger

Plastic for cutting processing Blue PEEK compatible with metal detectors TECAPEEK ID blue

Ensinger

60+ people viewing

Last viewed: 7 hours ago

Response time: 109.17 hours

PEEK Tubing

3 models listed

Plastic for cutting processing Medical blue PEEK TECAPEEK MT blue-Ensinger

Plastic for cutting processing Medical blue PEEK TECAPEEK MT blue

Ensinger

60+ people viewing

Last viewed: 13 minutes ago

Response time: 109.17 hours

PEEK Tubing

3 models listed

Plastic for cutting processing Blue PEEK TECAPEEK MT XRO blue compatible with medical X-ray detectors-Ensinger

Plastic for cutting processing Blue PEEK TECAPEEK MT XRO blue compatible with medical X-ray detectors

Ensinger

50+ people viewing

Last viewed: 17 hours ago

Response time: 109.17 hours

PEEK Tubing

3 models listed

Plastic for cutting processing High level medical ivory color PEEK TECAPEEK MT CLASSIX white-Ensinger

Plastic for cutting processing High level medical ivory color PEEK TECAPEEK MT CLASSIX white

Ensinger

60+ people viewing

Last viewed: 2 hours ago

Response time: 109.17 hours

PEEK Tubing

3 models listed

Plastic for cutting processing Blue PEEK TECAPEEK UD blue compatible with metal detectors and X-ray detectors-Ensinger

Plastic for cutting processing Blue PEEK TECAPEEK UD blue compatible with metal detectors and X-ray detectors

Ensinger

60+ people viewing

Last viewed: 1 hour ago

Response time: 109.17 hours

PEEK Tubing

3 models listed

Compression molding 15% carbon fiber + 10% graphite + 10% PTFE blended sliding PPS TECATRON PPS CM XP83 black-Ensinger

Compression molding 15% carbon fiber + 10% graphite + 10% PTFE blended sliding PPS TECATRON PPS CM XP83 black

Ensinger

70+ people viewing

Last viewed: 7 hours ago

Response time: 109.17 hours

PTFE Products

3 models listed

Plastic for cutting 30% glass fiber reinforced PEI TECAPEI GF30 natural-Ensinger

Plastic for cutting 30% glass fiber reinforced PEI TECAPEI GF30 natural

Ensinger

60+ people viewing

Last viewed: 7 minutes ago

Response time: 109.17 hours

Resin Tubes

3 models listed

Plastic for cutting 25% glass fiber reinforced POM-C TECAFORM AH GF25 natural-Ensinger

Plastic for cutting 25% glass fiber reinforced POM-C TECAFORM AH GF25 natural

Ensinger

80+ people viewing

Last viewed: 4 minutes ago

Response time: 109.17 hours

Polyoxymethylene

3 models listed


View more products of Ensinger

About Company Handling This Product

Ensinger

Response Rate

100.0%

Response Time

109.2hrs

Company Overview

Ensinger, founded in 1966 in Germany as solely a manufacturer of plastics for commercial customers, has grown ...

See More

  • Germany

Related search keywords

PEEK Tubing
PEEK Tubing　Ensinger
Ensinger

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree