All Categories
History
Product
Wireless IoT sensor unit IS920sL seriesHandling Company
Interplan Co., Ltd.Categories
Click on the part number for more information about each product
| Image | Part Number | Price (excluding tax) | Power supply | Transmission cycle | Mass | Setting method | Accuracy temperature | Radio department | Measuring range | Detection method | External dimensions | Operation overview | Remarks | Usage environment | Sensor |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
IS920sL-HT |
$ 71.50〜 |
2 AA alkaline batteries or USB power supply (Micro-B connector) Current consumption: Approximately 43mA during transmission, approximately 0.03mA during standby Battery voltage alarm data transmission function |
10 seconds, can be set from 1 to 1,440 minutes (initial value is 1 minute, can be set in 1 minute increments, maximum time error is ±15%) |
108g |
Operation can be started from the main unit, and the transmission cycle can be set via wireless. Contact number data can also be set for the fall sensor and human sensor. Setting values are saved in internal Flash memory. |
Temperature |
920MHz band specified low power radio (Built-in IM920sL, domestic radio law certified, ARIB STD-T108 compliant) Frequency channel: 38 Transmission power: 10mW |
Temperature sensor: -10~60℃ |
Temperature: semiconductor bandgap |
W69mm x D115mm x H28mm (excluding protrusions) |
Temperature/humidity data is sent once per set transmission cycle. |
A single base unit can operate up to 64 devices of all types (please contact us for more than 64 devices). |
Indoor temperature range: -10~60℃ Condensation: No Floating dust: Not particularly bad Corrosive gas: No |
Temperature and humidity sensor |
|
|
IS920sL-TL |
$ 71.50〜 |
2 AA alkaline batteries or USB power supply (Micro-B connector) Current consumption: Approximately 43mA during transmission, approximately 0.03mA during standby Battery voltage alarm data transmission function |
10 seconds, can be set from 1 to 1,440 minutes (default value is 1 minute, can be set in 1 minute increments, maximum time error is ±15%) |
109g |
Operation can be started from the main unit, and the transmission cycle can be set via wireless. Contact number data can also be set for the fall sensor and human sensor. Setting values are saved in the internal Flash memory. |
OFF: 0 to 30° ON: 60 to 180° (With the panel facing up, the horizontal state of the panel is 0°) Chattering dead time: 200ms |
920MHz band specified low power radio (Built-in IM920sL, domestic radio law certified, ARIB STD-T108 compliant) Frequency channel: 38 Transmission power: 10mW |
Tilt angle: 45°±15° 360° operation |
Ball sensor (mercury free) |
W69mm x D115mm x H28mm (excluding protrusions) |
When tilting from 0-30° to 45-60°, overturning data is sent three times at 200ms intervals When returning from 45-60° or more to 0-30°, non-overturning data is sent three times at 200ms intervals Set transmission cycle Send sensor status once every |
One base unit can operate up to 64 devices of all types (please contact us for more than 64 devices). |
Indoor temperature range: -10~60℃ Condensation: No Floating dust: Not particularly bad Corrosive gas: No |
Fall sensor |
|
|
IS920sL-MD |
$ 71.50〜 |
2 AA alkaline batteries or USB power supply (Micro-B connector) *However, USB power supply is recommended Current consumption: Approximately 43mA during transmission, approximately 0.04mA during standby |
10 seconds, can be set from 1 to 1,440 minutes (initial value is 1 minute, can be set in 1 minute increments, maximum time error is ±15%) |
110g |
Operation can be started from the base unit, and the transmission cycle can be set via wireless. Contact number data can also be set for the human sensor. Setting values are saved in internal Flash memory. |
Maximum detection distance: 3m Detection angle: 100° |
920MHz band specified low power radio (Built-in IM920sL, domestic radio law certified, ARIB STD-T108 compliant) Frequency channel: 38 Transmission power: 10mW |
Detection angle: 100° |
Pyroelectric infrared sensor |
W69mm x D115mm x H28mm (excluding protrusions) |
Sends ON/OFF contact data three times at 200ms intervals when sensor responds/non-reacts Sensor status is sent once per set sending cycle Sensor response time: approx. 4.7 seconds Uses contact mode data format |
One base unit can operate up to 64 devices of all types (please contact us for more than 64 devices). |
Indoor temperature range: -10~60℃ Condensation: No Floating dust: Not particularly bad Corrosive gas: No |
Human sensor |
Click on the part number for more information about each product
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
