All Categories

History

AD module analog conversion USB unit FCAD416-FCAD416
AD module analog conversion USB unit FCAD416-Flexcore LLC

AD module analog conversion USB unit FCAD416
Flexcore LLC


About This Product

■Summary

FlexCore's analog input modules are a product group with built-in large-capacity memory that performs successive conversion at specified cycles. Additionally, as a measure against high output impedance signal sources, operational amplifiers are mounted in each input circuit. Furthermore, it can operate by being powered by a USB cable without using a so-called USBY cable. Depending on the shape of the input terminal, there are two types: BNC terminal type and DSUB connector type, and although the basic performance is the same, each has its own characteristics.

■Trigger condition

・Internal trigger: Immediate trigger from the program. When using the specified edge, level, or range of analog input, or post-trigger, only the first channel of the scan is continuously monitored at maximum speed. During pre-triggering, the first channel is monitored while sampling all channels at specified time intervals. In either case, any channel can be specified as the first channel using the input connection function. - External trigger: Sampling is started by the specified edge of external TTL input, and sampling is stopped by the specified number of samplings or by external operation. Both pre-trigger and post-trigger possible ・Buffer memory: 8M words FIFO (During pre-trigger, it is possible to save data before trigger detection as a ring buffer in the range of 1M words to 7M words by software setting) ・AD data transfer: Continuously acquires sampled data via USB bus, and acquires pre-trigger buffer after reading FIFO data after sampling ends ・Digital input/output: 1-bit general-purpose TTL input, 1-bit general-purpose TTL output, clock output, synchronization signal output, control input, multiple units using master-slave system (maximum 15 slaves) synchronous sampling operation possible

  • Product

    AD module analog conversion USB unit FCAD416

Share this product


100+ people viewing

Last viewed: 10 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of AD module analog conversion USB unit FCAD416

Image Part Number Price (excluding tax) Power consumption Product composition Recommended cable Operating environment Control section/Others Frequency division function Control unit/other clock Unit mass Unit dimensions Analog input section input range (software selection) Analog input section Number of inputs (software selection) Analog input section input connection (software selection) Analog input section input protection function Analog input section input impedance AD converter nonlinearity AD converter multiple channel sampling speed AD conversion section temperature drift AD converter accuracy AD converter single channel sampling speed AD converter resolution AD converter internal noise AD converter AD data code
AD module analog conversion USB unit FCAD416-Part Number-FCAD416

FCAD416

Available upon quote

5V, 0.45AMax (USB bus power operation)

Main unit AD unit (RoHS compliant)
(Driver/control function Dll library for WindowsXP/Vista, attached software)

AEC-UM2 (USB2.0 cable, cable length 2m, manufactured by ACRO‘S)
or equivalent product (our shipping tests use a USB 2.0 cable with a cable length of 5m)

USB2.0 high speed (480Mbit/s)
Ambient temperature: 0~40℃ (no condensation)
Storage temperature: -10~80℃ (no condensation)

32BIT programmable counter (binary)

Internal 20MHz/Internal 16.384MHz/External TTL input (1MHz max)

720g, uses a resin case with conductive and electromagnetic shielding measures.

205mm×160mm×71mm (W×D×H) (including cover and rubber feet)

±10.24V/±5.12V/±2.56V/±1.28V (mixing is not possible)

16 channels single-ended input/8 channels differential input
Buffer amplifier installed on each input line to support high impedance signal sources

Actual input channels can be freely connected to each channel.

Absolute maximum rating ±35V

10MΩ (terminated with 10MΩ resistor)

±0.004%FSmax

Maximum 4uS x number of channels (minimum 3.276mS x number of channels)

±10ppm/℃Type

±0.02%FS/Manufacturing adjustment at room temperature

Max 250KHz (Min 305Hz)

16BIT

±4LSBType (for all input ranges, in our manufacturing system)

Binary or 2's complement (software specification)

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Signal Converters Products

Other products of Flexcore LLC

Reviews shown here are reviews of companies.


View more products of Flexcore LLC

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree