All Categories

History

Single crystal solar cell module-LP182*182-M-54-MH
Single crystal solar cell module-LP182*182-M-60-MH
Single crystal solar cell module-LP182*182-M-72-MH
Single crystal solar cell module-LP182*182-M-78-MH
Single crystal solar cell module-Lipton Energy

Single crystal solar cell module
Lipton Energy

Lipton Energy's Response Status

Response Rate

100.0%

Response Time

72.6hours


About This Product

The Leapton Energy solar cell module is produced in -house factory. We offer high -quality panels at high cost competitiveness. Panels, which have launched state -of -the -art facilities and achieved mass -produced factories in their owned factory, have been manufactured under severe Japanese standards and have been certified not only in Japan but also overseas international organizations. In addition, it is also selected as the "Tier1 List", a proof of top suppliers, and has a fulfilling warranty. You can use it with a long time and confidence.

■ About solar cell modules

・ Low -reflection high permeability hot glass Uses a "low -reflective high permeability enhanced glass" that can capture sunlight firmly into the cell. The surface is an AR coat * (reflection prevention film) that suppresses loss due to reflection. * AR Coat = Anti-Reflective Coated (reflection prevention process) ・ 2EVA sheet (top) * The EVA sheet uses a highly permeable material that enhances light absorption. You can transmit more light to the solar cell cell in the lower layer. * Ethylene acetate copolymerization resin (sealing material) ・ Solar cell cell It uses a high -quality cell that has cleared the strict inspection, and can be expected to output more than the nominal output value. ・ EVA seat (bottom) We use materials with high preventive use of ultraviolet rays. ・ Weather resistant back sheet Protects cells from damage such as high heat and ultraviolet light of sunlight. ・ Aluminum alloy frame The frame uses an aluminum alloy "AL-6063-T5" *, which is also used for architectural sashes and other intensity and corrosion resistance. * 6063 is an international aluminum alloy name, and the 6000s are AL-MG-SI alloy. T5 is a ton -quality symbol, indicating artificial aging after high temperature processing to cooling.

■ Characteristics of Leapton Energy solar cell modules

・ Adoption of multi -bass burner By reducing the distance between the bath bars, the electrical resistance has been reduced and the output has been improved. ・ Adoption of half cell Cut the conventional cell to 1/2 size. The output is improved even in environments with low sunshine, and hot spots are suppressed. ・ Acquisition of various authentications in Japan and overseas Various authentications have been obtained, such as fire resistance authentication, PID resistance authentication, and salt water corrosion resistance ( *) ammonia corrosion resistance authentication. * Excludes heavy salt damage areas (within 500m from the coast). ・ Low illuminance function It is equipped with a low illuminance function that demonstrates high performance even in a low sunshine environment. ・ Panel strength that can withstand various weather conditions It has the strength to withstand the snow load of 5400 PA and the wind pressure of 2400 PA. (According to the load test by Tüv Nord)

  • Product

    Single crystal solar cell module

Share this product


970+ people viewing

Last viewed: 3 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

4 Models of Single crystal solar cell module

Click on the part number for more information about each product

Image Part Number Price (excluding tax) output Conversion efficiency CellSize Modulesize Nominal open voltage Nominal short circuit current Nominal maximum output operating voltage Nominal maximum output operating current Module conversion efficiency Execution conversion efficiency (J-PEC standard) mass Module dimensions Number of cells Cell dimensions Maximum system voltage Junction box flame cable connector Applicable grade Nominal module operation temperature (NMOT) Short -circuit current temperature coefficient Temperature coefficient of open voltage Temperature coefficient of maximum output Output tolerance Module operation temperature range Wind pressure/snow pressure Maximum inline fuse rating
Single crystal solar cell module-Part Number-LP182*182-M-54-MH

LP182*182-M-54-MH

Available upon quote

410W 415W

20.9%21.2%

182*91mm

1724*1134*30mm

410W/37.34V 415W/37.54V

410W/13.70A 415W/13.75A

410W/31.32V 415W/31.62V

410W/13.06A 415W/13.12A

410W/20.9 % 415W/21.2 %

410W/23.0 % 415W/23.2 %

21kg

1724*1134*30mm

108 pieces (54 × 2) single crystal

182*91mm

1500V

Waterproof grade IP68

Aluminum alloy

1100mm * Other lengths are also available.

MC4 or MC4 equivalent

Ciassa

41 ± 3 ℃

#ERROR!

-0.28%/℃

-0.36%/℃

0 ~+5W

-40 ℃ ~+85 ℃

2400pa/5400pa

25A

Single crystal solar cell module-Part Number-LP182*182-M-60-MH

LP182*182-M-60-MH

Available upon quote

450W 460W 465W

20.8%21.2%21.5%

182*91mm

1909*1134*30mm

60W/41.80V 450W/41.40V 465W/42.00V

60W/13.78a 450W/13.68a 465W/13.83A

60W/35.20V 450W/34.70V 465W/35.40V

60W/13.08a 450W/12.96A 465W/13.14A

60W/21.2 % 450W/20.8 % 465W/21.5 %

60W/23.2 % 450W/22.7 % 465W/23.4 %

23kg

1909*1134*30mm

120 sheets (60 × 2) single crystal

182*91mm

1500V

Waterproof grade IP68

Aluminum alloy

1200mm * Other lengths are also available.

MC4 or MC4 equivalent

Ciassa

41 ± 3 ℃

#ERROR!

-0.28%/℃

-0.36%/℃

0 ~+5W

-40 ℃ ~+85 ℃

2400pa/5400pa

25A

Single crystal solar cell module-Part Number-LP182*182-M-72-MH

LP182*182-M-72-MH

Available upon quote

550W 555W

21.3%21.5%

182*91mm

2279*1134*35 (30) mm*It depends on the product shipment time. Please contact us.

550W/49.80V 555W/50.00V

550W/13.99a 555W/14.05A

550W/41.60V 555W/41.80V

550W/13.23A 555W/13.29A

550W/21.3 % 555W/21.5 %

550W/23.1 % 555W/23.3 %

27kg

2279*1134*35 (30) mm

144 sheets (72 × 2) single crystal

182*91mm

1500V

Waterproof grade IP68

Aluminum alloy

1400mm * Other lengths can be prepared.

MC4 or MC4 equivalent

Ciassa

41 ± 3 ℃

+ 0.05%/℃

-0.28%/℃

-0.36%/℃

0 ~+5W

-40 ℃ ~+85 ℃

2400pa/5400pa

25A

Single crystal solar cell module-Part Number-LP182*182-M-78-MH

LP182*182-M-78-MH

Available upon quote

590W 595W 600W 605W

21.3%21.5%21.7%21.8%

182*91mm

2443*1134*35mm

590W/53.70V 595W/53.90V 600W/54.10V 605W/54.30V

590W/13.94A 595W/14.01A 600W/14.08A 605W/14.15A

590W/44.80V 595W/45.00V 600W/45.20V 605W/45.40V

590W/13.17A 595W/13.22A 600W/13.27A 605W/13.32A

590W/21.3 % 595W/21.5 % 600W/21.7 % 605W/21.8 %

590W/22.9 % 595W/23.1 % 600W/23.3 % 605W/23.5 %

29kg

2443*1134*35mm

156 sheets (78 × 2) single crystal

182*91mm

1500V

Waterproof grade IP68

Aluminum alloy

1500mm * Other lengths are also available.

MC4 or MC4 equivalent

Ciassa

41 ± 3 ℃

+ 0.05%/℃

-0.28%/℃

-0.36%/℃

0 ~+5W

-40 ℃ ~+85 ℃

2400pa/5400pa

25A

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Solar Power Generation Equipment Products

Other products of Lipton Energy

Reviews shown here are reviews of companies.


View more products of Lipton Energy

About Company Handling This Product

Response Rate

100.0%


Response Time

72.6hrs

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree