Price (excluding tax)
■ Overview "Serama Cast 510" is highly heat -resistant and cast ceramic. It is used for high -temperature cast -type products and jigs. ■ Characteristics The "Serama Cast 510" is a ceramic filler made of fine powder as a main agent, and is used for adding water and making a jigs for high -temperature. In particular, it is used to enhance the thermal conductivity and insulation of the leco of molten metal processing, induced heating coil (heater). The "Serama cast 510" has a 75 volts/mil, an insulating compression strength, an insulation and high -strength, so it is suitable for creating a relatively large molding. ■ How to use Mix water at a ratio of 100 to 100 with a weight ratio and knead it at a ratio of 15 to 19. After filling, the processing material is horizontally covered with a low humidity or a plastic sheet, and at room temperature for more than 16 to 24 hours, 3 hours at 93 ° C. for 3 hours at 121 ° C. And harden. The pores after burning is 7%or less.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Compression intensity (PSI)
Heat resistance upper limit (℃)
Insulation power (VOLTS/MIL)
capacity
Part Number
Serama cast 510Handling Company
Edec Co., Ltd.Items marked with have different values depending on the model number.
Product Image | Price (excluding tax) | Compression intensity (PSI) | Heat resistance upper limit (℃) | Insulation power (VOLTS/MIL) | capacity |
---|---|---|---|---|---|
Available upon quote | 8,000 | 1,760 | 75 | 1 Pint (≒ 500ml), 1 quote (≒ 1L) |