All Categories
History
Price (excluding tax)
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Abrasion resistant eraser
Adhesion
Alcohol resistance
Curing conditions Cumulative light intensity
Curing conditions Lamp output
Curing conditions Lamp type
Curing conditions Peak illuminance
Curing conditions Pre-drying temperature x time
Heat cycle resistance
Heat resistance
Low temperature resistance
Migration resistance
Mixing ratio Paint: Thinner (weight ratio)
Moisture resistance
Paint viscosity (Iwata simple viscometer NK-2,20℃)
Painting method Gun caliber
Painting method Spray pressure
Pencil hardness
Spray gun and object distance
Standard film thickness
Wear resistant jeans
Part Number
UV7200Handling Company
Musashi Paint Co., Ltd.Categories
| Image | Price (excluding tax) | Abrasion resistant eraser | Adhesion | Alcohol resistance | Curing conditions Cumulative light intensity | Curing conditions Lamp output | Curing conditions Lamp type | Curing conditions Peak illuminance | Curing conditions Pre-drying temperature x time | Heat cycle resistance | Heat resistance | Low temperature resistance | Migration resistance | Mixing ratio Paint: Thinner (weight ratio) | Moisture resistance | Paint viscosity (Iwata simple viscometer NK-2,20℃) | Painting method Gun caliber | Painting method Spray pressure | Pencil hardness | Spray gun and object distance | Standard film thickness | Wear resistant jeans |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Available upon quote | Sony eraser tester, load 1.64kgf, 300 times, no substrate exposure [Passed] | 1mm square grid Cellotape peeling test (10×10) [100/100] | 99.5% ethanol rubbing, load 500g/cm2,500 times, no exposed substrate [Passed] | 800±100mj/cm2 *Measured using EYE UV METER UVPF-A1 (light receiving section PD-365 manufactured by EYE GRAPHICS Co., Ltd.) | 100±20W/cm | High pressure mercury lamp | 100±20mW/cm2 *Measured using EYE UV METER UVPF-A1 (light receiving section PD-365 manufactured by EYE GRAPHICS Co., Ltd.) | 60℃×5 minutes | -20℃×3 hours ⇔ 60℃×3 hours, adhesion test after 10 cycles [100/100] | Adhesion test after being left at 85℃ for 96 hours [100/100] | Adhesion test after being left at -40℃ for 96 hours [100/100] | Foamed polyethylene, load 80g/cm2, 60℃, 48 hours, no appearance abnormality [Passed] | 100:110±10 | 40℃×98%RH×Adhesion test after 48 hours [100/100] | 8.5±0.5 seconds | 1.3±0.3mmφ | 0.3±0.1MPa | Pencil scratch tester, Mitsubishi Uni, load 1kg, scratch method [2H~3H] | 25±5cm | 10±2μm | Rubbing test, load 500g/cm2, 2000 reciprocations, no substrate exposure [Passed] |
Reviews shown here are reviews of companies.
