All Categories
History
Price (excluding tax)
Response Rate
100.0%
Response Time
52.7hours
■Main features ・Inspection for disconnections, incorrect wiring, instantaneous interruptions, and short circuits ・Create and edit connection data on the main unit or computer ・Counting the number of OK/NG (the number of NG is only at manual start) - Compact shape, does not take up space for installation ■Setting the inspection start mode ・Auto start (auto start) When the inspection item is connected, the inspection will start automatically. If the product is good, a pass sound will sound and the number of OKs will be counted. Outputs a contact signal externally. ・Manual start (Manual start) Connect the inspection item and press the start button to start the inspection. It can also be started using an external signal. If the product is good, a pass sound will sound and the number of OKs will be counted. If the product is defective, an alarm will sound and the number of NGs will be counted. Both OK/NG output contact signals to the outside. ■Momentary interruption inspection The purpose is to eliminate unreliable connections such as broken wires and loose terminals. If external forces such as vibration, bending, or tension are applied to the test item, unreliable connections may break momentarily (instantaneous disconnection). If this instantaneous interruption occurs, an alarm will sound and the location will be displayed. ■Specifications ・Number of inspection points: 64P to 384P (in 64P units) ・Inspection sensitivity: Open circuit 200Ω/2.2KΩ or more, short circuit 60KΩ or less, momentary disconnection 100μsec (at 128P) ・Inspection start mode: auto/manual start ・External output: OK/NG signal output...No-voltage contact signal (0.5/1/5/10sec)/Open collector ・Diode circuit: Bidirectional current test ・OK sound: Select from 4 tones ・OK/NG number: Both OK/NG numbers are displayed up to 9999 (NG number is displayed only at manual start) ・Step inspection: Up to 10 steps can be set ・Line capacitance: 0.2μF or less ・Display: 2-line 16-digit liquid crystal display ・Number of connection data saved: 20 data ・PC interface: USB ・Inspection product connection connector: 64-pin pressure welding connector for flat cable ・AC input voltage: AC 85V to 264V ・Dimensions: 290 (W) × 130 (H) × 250 (D) mm (excluding protrusions) ・Mass: 6kg
You can search for other models from each index. The displayed value is the value of the currently selected part number.
DIO box external dimensions
DIO box interface
DIO box number of input points
DIO box number of output points
DIO box operating voltage
DIO box weight
LED lighting section external shape
LED lighting section issue color
LED lighting section operating voltage
LED lighting section weight
USB camera SNR
USB camera effective pixels
USB camera external dimensions
USB camera image sensor
USB camera image size
USB camera interface
Usb camera lens mount
Continuity test Inspection method
Continuity test judgment
Continuity test net
Continuity test voltage/current
Dielectric strength meter accuracy Applied voltage
Dielectric strength meter accuracy Breaking current
Dielectric strength meter accuracy Output waveform
Insulation resistance test Insulation resistance
Insulation resistance test Test time
Insulation resistance test application method
Insulation resistance test test voltage
Low resistance test Internal resistance
Low resistance test open circuit voltage
Low resistance test resistance value
Low resistance test test time
Megohmmeter accuracy Breaking resistance
Membrane meter accuracy Applied voltage
Momentary disconnection inspection detection pulse
Point capacity
Withstand voltage test Breaking current
Withstand voltage test Test time
Withstand voltage test Test voltage
Withstand voltage test application method
Part Number
WFA-200Product
Harness checkerHandling Company
Crimping Machine Service Co., Ltd.Image | Price (excluding tax) |
---|---|
![]() |
Available upon quote |
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
52.7hrs