All Categories

History

Harness checker-Crimping Machine Service Co., Ltd.

Price (excluding tax)

Estimate Required

Crimping Machine Service Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

52.7hours


Model Description

■Reliable inspection possible - When the power is turned on, all error display lamps will be lit (for about 5 seconds, up to the end setting circuit), allowing the inspection machine to self-diagnose. (If the circuit does not light up, the test circuit is connected or it is malfunctioning.) ・Since the test is repeated at high speed (1/50 seconds for 50 circuits), if the pass display is displayed for 1 second, it means that 50 circuits have been tested 50 times. - Adequate protection measures have been taken against static electricity and noise, so it can be used with confidence even in harsh environments. ■Easy to handle ・No operations other than turning the power switch ON/OFF are required, and there is no risk of operational errors. ・Each circuit has fixed input/output terminals, and each circuit is connected to a pair of input/output terminals. When inspecting, just connect it and you will instantly know whether it is good or bad with the display and sound. ■Displays defective circuits so that they can be easily found. Confirmation of non-defective products is clear. -Each circuit has an error indicator lamp that indicates a defective circuit (disconnection, incorrect wiring, short circuit). In addition, you can write the line color, circuit number, etc. in the frame below the error indicator lamp, so you can quickly identify the defective circuit. ・When the product is in good condition, the CORRECT lamp (large green LED) lights up and a tremolo sound sounds. It also outputs an OK signal to the outside. ■Branch circuits can also be inspected. The number of test circuits can be set arbitrarily. - Even if the test circuit has complicated branches (branch lines), it can be tested. ・The number of test circuits can be set arbitrarily. (For example, testing 15 circuits using WP-30B) ■If used in conjunction, up to 100 circuits can be tested. - Up to 100 circuits can be tested by connecting two units. (Example: WP-50B+WP-50B=100 circuits, WP-50B+WP-30B=80 circuits) ■Specifications ・Model name: WP-30B ・Maximum number of test circuits: 30 circuits ・Inspection time: Approximately 400μscc/circuit (approximately 0.02 seconds for 50 circuits) ・Sensitivity: Open circuit > 2kΩ Short circuit <1.5kΩ ・Line capacitance: 0.03μF or less ・Test voltage: DC 5V ・Power consumption: 8VA ・Dimensions (W×H×D): 220×174×210mm ・Weight (NET): 3.2kg ・AC input voltage: AC 85V to 132V or AC 170V to 264V 50/60Hz


Model Filter

You can search for other models from each index. The displayed value is the value of the currently selected part number.

DIO box external dimensions

DIO box interface

DIO box number of input points

DIO box number of output points

DIO box operating voltage

DIO box weight

LED lighting section external shape

LED lighting section issue color

LED lighting section operating voltage

LED lighting section weight

USB camera SNR

USB camera effective pixels

USB camera external dimensions

USB camera image sensor

USB camera image size

USB camera interface

Usb camera lens mount

Continuity test Inspection method

Continuity test judgment

Continuity test net

Continuity test voltage/current

Dielectric strength meter accuracy Applied voltage

Dielectric strength meter accuracy Breaking current

Dielectric strength meter accuracy Output waveform

Insulation resistance test Insulation resistance

Insulation resistance test Test time

Insulation resistance test application method

Insulation resistance test test voltage

Low resistance test Internal resistance

Low resistance test open circuit voltage

Low resistance test resistance value

Low resistance test test time

Megohmmeter accuracy Breaking resistance

Membrane meter accuracy Applied voltage

Momentary disconnection inspection detection pulse

Point capacity

Withstand voltage test Breaking current

Withstand voltage test Test time

Withstand voltage test Test voltage

Withstand voltage test application method

See all 10 models in list
  • Part Number

    WP-30B

Share this product


390+ people viewing

Last viewed: 6 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

Harness checker WP-30B's performance table

Image Price (excluding tax)
Harness checker-Part Number-WP-30B Available upon quote

There are 10 models for this product.

Other products of Crimping Machine Service Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Crimping Machine Service Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

52.7hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree