All Categories
History
Price (excluding tax)
Response Rate
100.0%
Response Time
52.7hours
■Available inspections ・Continuity inspection (disconnection, short circuit, incorrect wiring) ・Momentary disconnection inspection (loose contact) ・Low resistance test ・Withstand voltage test ・Insulation resistance test ■Main features - Inspection conditions such as applied voltage, breaking current, and insulation resistance value are automatically set when calling up the product name. ・Since high voltage is generated by a DC-AC inverter, inspection can be performed with stable output without being affected by fluctuations in the commercial power supply. ・Inspection time is shortened because high voltage is applied to each group based on memorized circuit data. ・It is an all-in-one yet space-saving type that combines continuity, instantaneous interruption, low resistance, withstand voltage, and insulation resistance testing functions. ・Equipped with a function to check for incorrect wiring (one-end inspection) by using a search probe to make contact with the open lead terminal of the connector on one side and the open lead terminal on the other side. ・The number of points for each model is 4 types. Furthermore, it is possible to expand from 64p to 128p, 192p, and 256p by adding a board. ■About continuity test ・Continuity testing has two purposes. One is to inspect for disconnections and incorrect wiring defects, which are the basics of circuit wiring. The second step is to confirm that the inspection item is securely attached to the jig adapter. This is because in the withstand voltage/insulation resistance test, even if the test item is not installed, the test will pass and the test has no meaning. Therefore, continuity tests are required before and after withstanding voltage and insulation resistance tests. ■About momentary disconnection inspection - During normal conductor inspection, even if the cable looks normal, it may break due to vibration, impact, bending, tension, etc. Inspection is required to detect such momentary disconnections. ■About withstand voltage test - Apply high voltage between different polarity wires such as multi-core cables to check for discharge. Voltage failures especially occur between wires and contact pins in pressure welding areas, between pins in soldering areas, and between shield wires and core wires in shielding areas. ■About insulation resistance test - Inspects whether the resistance between the lines is greater than the set value of the quality assurance conditions. Insulation resistance is greatly affected by impurities such as solder flux, insulator material, humidity, etc. Insulation failures can occur not only due to poor voltage resistance, but also due to molding materials, dirt on contacts, etc.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
DIO box external dimensions
DIO box interface
DIO box number of input points
DIO box number of output points
DIO box operating voltage
DIO box weight
LED lighting section external shape
LED lighting section issue color
LED lighting section operating voltage
LED lighting section weight
USB camera SNR
USB camera effective pixels
USB camera external dimensions
USB camera image sensor
USB camera image size
USB camera interface
Usb camera lens mount
Continuity test Inspection method
Continuity test judgment
Continuity test net
Continuity test voltage/current
Dielectric strength meter accuracy Applied voltage
Dielectric strength meter accuracy Breaking current
Dielectric strength meter accuracy Output waveform
Insulation resistance test Insulation resistance
Insulation resistance test Test time
Insulation resistance test application method
Insulation resistance test test voltage
Low resistance test Internal resistance
Low resistance test open circuit voltage
Low resistance test resistance value
Low resistance test test time
Megohmmeter accuracy Breaking resistance
Membrane meter accuracy Applied voltage
Momentary disconnection inspection detection pulse
Point capacity
Withstand voltage test Breaking current
Withstand voltage test Test time
Withstand voltage test Test voltage
Withstand voltage test application method
Part Number
NHC-6450WProduct
Harness checkerHandling Company
Crimping Machine Service Co., Ltd.| Image | Price (excluding tax) | Continuity test Inspection method | Continuity test judgment | Continuity test net | Continuity test voltage/current | Dielectric strength meter accuracy Applied voltage | Dielectric strength meter accuracy Breaking current | Dielectric strength meter accuracy Output waveform | Insulation resistance test Insulation resistance | Insulation resistance test Test time | Insulation resistance test application method | Insulation resistance test test voltage | Low resistance test Internal resistance | Low resistance test open circuit voltage | Low resistance test resistance value | Low resistance test test time | Megohmmeter accuracy Breaking resistance | Membrane meter accuracy Applied voltage | Momentary disconnection inspection detection pulse | Point capacity | Withstand voltage test Breaking current | Withstand voltage test Test time | Withstand voltage test Test voltage | Withstand voltage test application method |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | Bidirectional check (diode possible) | Continuity: 1KΩ or less Disconnection: 3KΩ or more | Maximum 100 points | DC 5V/1.5mA | ±5% of set value (when not available) | ±5% of set value | Sine wave 50Hz ±5% | 2M~100MΩ at 50V 5M~500MΩ at 100~150V 20M~1,000MΩ at 200~1,000V | 0.3~10 seconds (in 0.1 second increments) / 1 step | Automatic application, for flat cables (between lines + between pins), (scanning search in case of failure), user pattern | DC50~300V (50V units), DC400~1,000V (100V units) | 2Ω or less | DC 5V | 1~50Ω (1Ω unit), 50~100Ω (2Ω unit) | 125mSec (milliseconds) / 1 point | ±5% of set value | ±5% of setting value (when not available) | 200n / 400n / 800n / 1μ / 2μ / 3μ seconds | 64p 128p 192p 256p All points input/output supported | 0.5~20mA, 0.5~3mA (0.5mA unit), 4~20mA (1mA unit) | 0.1~99 seconds (in 0.1 second increments) / 1 step | AC50~1,000V, 50~400V (10V units), 400~1,000 (20V units) | Automatic application, for flat cables (between lines + between pins), (scanning search when a failure occurs), user pattern (requires PC management software) |
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
52.7hrs
![Wire stripper [electric]-Crimping Machine Service Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/30025662024051932.png)
![Wire stripper [air]-Crimping Machine Service Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/30025662024051936.png)
![Wire stripper [tabletop]-Crimping Machine Service Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/30025662024051940.png)
