All Categories
History
Price (excluding tax)
Response Rate
100.0%
Response Time
52.7hours
It is a double-end terminal punching machine that inserts one series of seals. ■Maximum processing capacity has been significantly improved The drive unit is equipped with a high-precision ball screw and the latest servo motor unit. In addition, the design of the TR201, which has a proven track record in ultra-fine wire processing, including the cutter unit and clamp mechanism, has been inherited, achieving both high-speed and high-precision processing. ■Compatible with eco electric wires Feeding wires with a pre-feeder and length measuring unit reduces the burden on the wires and is advantageous for processing eco-friendly wires and special wires. Additionally, the wire clamp and wire feeding mechanism have been completely improved. The wire transfer of the R clamp is highly reliable and stable machining is achieved. ■Energy saving and low noise Power consumption reduced by 30% (compared to our previous model) We have achieved energy savings and low noise through a lightweight mechanical design and the use of precision ball screws with low drive loss. ■Stainless steel cover & white We have eliminated the need to paint the parts that come into contact with wires and terminals, and have adopted stainless steel for the terminal guide, wire tray, etc. The paint color is a clean white as the base color, and the cover uses a lot of stainless steel, so you can use it cleanly for a long time. ■Equipped with PC control Visibility and operability have been improved with an easier-to-read graphical screen. The Windows base improves versatility, including control software upgrades and customization. ■Features ・Maximum processing capacity for single-end seals: 2,600 pieces/h (Single-end seal insertion and both-end crimping processing: cutting length 100 mm) ・Significantly speeds up seal insertion: By installing it on a high-speed base machine and optimizing machine operation, processing capacity has increased by 43% (compared to the conventional machine TRD111WPSB) - Stable feeding with separate parts feeder: Stable seal feeding is possible with less influence from mechanical vibration. ・Easy replacement with a compact unit: You can easily switch to a different seal by replacing the insertion unit.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Body mass
Crimping machine
Cutting length
Drive motor
Machine dimensions
Maximum processing capacity (when crimping terminals at both ends)
Power consumption
Power supply
Processed electric wire
Required supply air
Standard equipment
Strip length
Wire feed
Wire outer diameter
Crimp terminal
Operation screen
Sensor
Display language
Recommended operating temperature
Applicable seal
Seal supply method
Part Number
TRD301WPSBHandling Company
Crimping Machine Service Co., Ltd.| Image | Price (excluding tax) | Applicable seal | Body mass | Crimp terminal | Crimping machine | Cutting length | Display language | Drive motor | Machine dimensions | Maximum processing capacity (when crimping terminals at both ends) | Power supply | Processed electric wire | Recommended operating temperature | Required supply air | Seal supply method | Strip length | Wire outer diameter |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | Outer diameter Φ8mm, length 12mm or less Circular rubber seal | Main body approx. 670kg, pre-feeder approx. 40kg | Open barrel continuous terminal side/end feed | 24.5kN (2.5t) | 100mm (with seal inserted) ~9,999mm | 2 languages English and 1 language (Japanese, Chinese, Thai, Spanish, Indonesian) | AC servo motor 10 axes | H1,530mm x W1,080mm x D880mm (body only, excluding protrusions) | 4,500 pieces/h, 2,600 pieces/h (front side seal inserted) | Three-phase AC200±20V 15A 50/60Hz | 0.2~2.0mm | 15~25℃ | 0.5MPa (5kgf/cm2) 0.1m3/min (100l/min) Normal or higher | Drum type parts feeder, tube air conveyance type | Full strip 1~17mm (input 0.1mm increments), semi-strip 1~25mm (input 0.1mm increments) | Φ1.0~3.0mm |
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
52.7hrs
![Wire stripper [electric]-Crimping Machine Service Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/30025662024051932.png)
![Wire stripper [air]-Crimping Machine Service Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/30025662024051936.png)
![Wire stripper [tabletop]-Crimping Machine Service Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/30025662024051940.png)
