All Categories
History
Price (excluding tax)
■Diaphragm/piston pressure switch 250V (maximum voltage) Galvanized steel, bayonet terminals C contact output, silver contact Withstand pressure 100/300bar (Static pressure and dynamic pressure during actual use should be 30 to 50% less than the withstand pressure value of each type.The values shown here are based on the component structure. ) Hysteresis adjustable
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Adjustment range (unit bar) (accuracy at room temperature)
Connection type
Current-carrying section cross-sectional area
Drip-proof structure
Material
Mechanical life
Operating temperature (diaphragm seal material)
Over voltage
Pressure resistance
Rated current (short circuit prevention)
Rated frequency
Rated insulation voltage
Rated power supply voltage 125volt DC
Rated power supply voltage 24volt DC
Rated power supply voltage 250volt AC 50/60Hz
Rated power supply voltage 250volt DC
Rated power supply voltage 50volt DC
Rated power supply voltage 75volt DC
Rated surge capacity
Rated thermal current
Shockproof
Short circuit current
Switching frequency
Tightening torque
Vibration resistance
Hysteresis adjustable
Part Number
180Handling Company
LCI Co., Ltd.Categories
Image | Price (excluding tax) | Adjustment range (unit bar) (accuracy at room temperature) | Connection type | Current-carrying section cross-sectional area | Drip-proof structure | Hysteresis adjustable | Material | Mechanical life | Operating temperature (diaphragm seal material) | Over voltage | Pressure resistance | Rated current (short circuit prevention) | Rated frequency | Rated insulation voltage | Rated power supply voltage 125volt DC | Rated power supply voltage 24volt DC | Rated power supply voltage 250volt AC 50/60Hz | Rated power supply voltage 250volt DC | Rated power supply voltage 50volt DC | Rated power supply voltage 75volt DC | Rated surge capacity | Rated thermal current | Shockproof | Short circuit current | Switching frequency | Tightening torque | Vibration resistance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
Available upon quote | ・100bar 0.3-1.5 (±0.2) 1-10 (±0.5) ・300bar 1-10 (±0.5) 10-50 (±3.0) 10-100 (±3.0-5.0) | M 10×1 taper M 12×1.5 G 1/4 | 0.5 - 1.5mm^2 | IP65, IP100 (terminal) (EN60529:1991+A1;1999) | Adjustable in the range of 10-30%, standard value of hiss is 10-20% | Galvanized steel | 10^6 times (maximum load 50bar) | NBR -30℃-+100℃ EPDM -30℃-+120℃ FKM -5℃-+120℃ Silicone -40℃-+120℃ (optional) HNBR -30℃-+120℃ (optional) | <2.5kV | 100/300bar | Up to 3.5amp | DC and 50/60Hz | 300volt | Rated operating current 0.3/0.2amp (Usage classification DC 12/DC 13) | Rated operating current 4/4amp (Usage classification DC 12/DC 13) | Rated operating current 4amp (use classification AC 12), 1amp (use classification AC 14) | Rated operating current 0.25/0.2amp (Usage classification DC 12/DC 13) | Rated operating current 2/1amp (Usage classification DC 12/DC 13) | Rated operating current 1/0.5amp (Usage classification DC 12/DC 13) | 4kV | 5amp | 294m/s^2; 14ms half sine wave | <350amp | 200 times/min | <0.35Nm | 10g/5~200Hz sine wave |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.