All Categories
History
Price (excluding tax)
Response Rate
100.0%
Response Time
69.4hours
■Features ・Equipped with computer functions, cutting to specified dimensions is possible just by inputting data. ・Easy setup and operation even for a wide variety of small quantity machining, no experience required ・The table returns to the starting point with each stroke, and the cutter is completely separated from the workpiece, resulting in less wear on the blade and better cutting performance. - Depth of cut and spindle speed can be changed freely, making it easy to process difficult-to-cut materials such as stainless steel. ・To install the cutter, just tighten the pin, and there is no need to adjust the angle perpendicular to the table even if you change the cutter. ・Control is fully automated using a sequencer, and interfaces with loaders and mouthbots are also possible (*TK-150A-SC underwent a minor change in February 2013) ■Operation panel By changing the operation panel to a touch panel, it is now possible to assign product names to all processed data and manage and save numbers (80 pieces). In addition, the "compact and integrated control panel" makes it easy to relocate within the factory. Furthermore, by adopting an absolute value detection type servo motor, there is no need to return to the origin, and if you want to continue processing from the previous day, you can immediately turn on the power and process. Return-to-origin operation is no longer required for new machining or for machining after reading the machining data number. ■Operating procedure ・Determine the machining data No., and enter the product name, workpiece hole diameter, keyway width, cutter height, keyway depth, 1 stroke feed amount, number of zero cuts, and start position (or read the machining data No.) ・If the inscribed position movement key is pressed or the cutter height is input as 0, the table moves to the inscribed position. ・Press the current position 0 set key ・Press the start position key ・Press the automatic ON switch ■Fully automatic cycle Work clamp → Arm forward → Arm clamp → Spindle up and down → Coolant pump ON → Table feed → End of cutting → Spindle stop (bottom dead center) → Coolant pump OFF → Arm retreat → Work unclamp
You can search for other models from each index. The displayed value is the value of the currently selected part number.
1 stroke depth of cut
1 stroke table return
Arm front and rear/arm clamp
Bottom dimension from arbor back to column (mm)
Control method
Floor to table height (mm)
Lubricating oil pump (centralized lubrication)
Main motor *3 phase 200V
Maximum cutting length when using 1 flute (mm)
Maximum cutting length when using 2 flutes (mm)
Maximum outer diameter of workpiece when using inner diameter reference guide sesame
Minimum inner diameter of workpiece
Outer diameter (tombstone) Maximum outer diameter of workpiece at standard time
Piston stroke (mm)
Processing key width (mm)
Required floor area (mm)
Return to table start position after cutting
Specification name
Spindle drum rotation speed (RPM)
Table movement back and forth (mm)
Table movement left and right
Table surface size (mm)
Weight (kg)
Pneumatic cylinder (arm clamp)
Pneumatic cylinder (front and rear of arm)
Pneumatic cylinder (work clamp)
Rotary actuator (feed in/off)
Table return motor
Ac servo motor
Floor level to top of indicator light height
Part Number
TK-150A-SCHandling Company
Takara Machine Industry Co., Ltd.Categories
| Image | Price (excluding tax) | 1 stroke depth of cut | 1 stroke table return | Ac servo motor | Arm front and rear/arm clamp | Bottom dimension from arbor back to column (mm) | Control method | Floor level to top of indicator light height | Floor to table height (mm) | Lubricating oil pump (centralized lubrication) | Main motor *3 phase 200V | Maximum cutting length when using 1 flute (mm) | Maximum cutting length when using 2 flutes (mm) | Maximum outer diameter of workpiece when using inner diameter reference guide sesame | Minimum inner diameter of workpiece | Outer diameter (tombstone) Maximum outer diameter of workpiece at standard time | Piston stroke (mm) | Pneumatic cylinder (arm clamp) | Pneumatic cylinder (front and rear of arm) | Pneumatic cylinder (work clamp) | Processing key width (mm) | Required floor area (mm) | Return to table start position after cutting | Specification name | Spindle drum rotation speed (RPM) | Table movement back and forth (mm) | Table movement left and right | Table surface size (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | 0.01mm unit 0.01~0.30 | Starting position | 750W | Automatic | 345 | Sequence | 1,800mm | 1,000 | Automatic | 4P | 130 | 100 | Approximately 700φ | 8φ | Approximately 300φ | 150 | 50φ 40St | 32φ 200St | 50φ 100St | 3~20 | 550×1,000 | Automatic (every stroke) | Fully automatic | 35/30/20 | 60 | 25mm each | 560×570 | 850 |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
69.4hrs
