All Categories
History
Price (excluding tax)
Response Rate
100.0%
Response Time
69.4hours
■Feature 1 ・Easy tools (spanner, box wrench) ・Short setup time ・No marking required ・No skill required ・By using a multi-blade saw blade (broach), it is significantly more efficient than conventional slotters, etc. ・Keyway depth can be set freely ・Taper keys up to 1/20 do not require a jig, and can be made up to 1/20 or more with a jig. ・When machining a single keyway on a round object, in most cases no tools other than a cutting tool (broach) are required. ・Economical as the brooch can be repolished ・More economical than other models in terms of maintenance costs, price, and efficiency ・Wide range of support from high-mix low-volume to mass production ■Feature 2 ・The groove width that can be cut is 3 to 35 mm. ・3-speed cutting speed ・Highly accurate indexing using knock pin method ・Can assist with broaching during cutting even under the table surface
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Bottom diameter from broach center to column (mm)
Column drive motor
Coolant pump
Cutting end lamp
Cutting speed (3-speed) (m/min)
Floor to table height (mm)
Indexing (dowel pin method)
Lubricating oil pump (centralized lubrication)
Machine weight (kg)
Main motor (brake motor) *3 phase 200V
Maximum outer diameter of workpiece when using inner diameter reference guide sesame
Maximum workpiece height (mm)
Minimum inner diameter of workpiece
Outer diameter (tombstone) Maximum outer diameter of workpiece at standard time
Piston stroke (mm)
Pneumatic cylinder
Processing key width (mm)
Required floor area (mm)
Specification name
Spline machining maximum inner diameter
Table movement back and forth (mm)
Table movement left and right
Table surface size
Patrol light (operation end light)
Total counter
1 stroke table feed amount (mm)
Servo motor (table feed)
Table feed speed (during cutting/rapid traverse)
Table rotation motor
Part Number
TK-250NS-S (standard model)Product
TK-250NS series (automatic type)Handling Company
Takara Machine Industry Co., Ltd.Categories
| Image | Price (excluding tax) | Bottom diameter from broach center to column (mm) | Column drive motor | Coolant pump | Cutting end lamp | Cutting speed (3-speed) (m/min) | Floor to table height (mm) | Indexing (dowel pin method) | Lubricating oil pump (centralized lubrication) | Machine weight (kg) | Main motor (brake motor) *3 phase 200V | Maximum outer diameter of workpiece when using inner diameter reference guide sesame | Maximum workpiece height (mm) | Minimum inner diameter of workpiece | Outer diameter (tombstone) Maximum outer diameter of workpiece at standard time | Piston stroke (mm) | Pneumatic cylinder | Processing key width (mm) | Required floor area (mm) | Specification name | Spline machining maximum inner diameter | Table movement back and forth (mm) | Table movement left and right | Table surface size |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | 513 | 400W4P | 60W2P | Standard equipment | 7.5, 5.9, 4.8 | 910 | 12 equal parts | Manual | 1,080 | 3.7KW4P | Approximately 900φ | 250 | 8φ | Approximately 400φ | 110 | 90φ × 60st, 100φ × 125st, 50φ × 180° | 3~35 | 1,500 × 900 | Standard machine | 156φ | 60 | 20mm each | 600φ |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
69.4hrs
