All Categories
History
Price (excluding tax)
■Features ・If the radio waves cannot reach directly (at a distance of 100m or more or the radio wave conditions are poor), the radio waves from the transmitter are received and retransmitted to the receiver. ・Up to 2 repeaters can be used on-site ・There are two types of relay modes. 1. Parallel relay mode that relays only the transmitter's radio waves 2. Serial relay mode that relays only radio waves from the repeater ・Since the received radio waves are retransmitted with different timing, there is no collision of radio waves (RTX-100-S 0 / 0.8 seconds RTX-100-SA 1.6 / 2.4 seconds) ・No registration is required as the received radio waves will be retransmitted as they are. ・The repeater can relay up to 2 times by combining modes that only relay the transmitter's radio waves and modes that only relay the repeater's radio waves. ・If you use multiple transmitter-only relay modes in the same area, you can install up to 4 transmitters.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
External dimensions
Frequency used
Indicator light
Operation switch
Power consumption/current
Power outage compensation
Power supply voltage
Radio wave range
Receivable distance
Installation location
Number of devices that can be registered
Relayable equipment
Output
Part Number
RTX-100-SAHandling Company
Excite Co., Ltd.Categories
| Image | Price (excluding tax) | External dimensions | Frequency used | Indicator light | Operation switch | Power consumption/current | Power outage compensation | Power supply voltage | Radio wave range | Receivable distance |
|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | W120 × H200 × D47mm (excluding antenna) | 426MHz band (10mW or less) | Operation indicator: Green LED When energized: Lights up When running on battery: Flashing Reception indicator: Red LED Transmission indicator: Red LED | Relay mode selector switch Overdue time selector switch (RTX-100-S 0 / 0.8 seconds RTX-100-SA 1.6 / 2.4 seconds) | 1.8W or 70mA or less | Approximately 30 minutes (when fully charged) Ni-Cd battery | AC100V (50/60Hz) or DC10 ~ 16V | Approximately 100m (line-of-sight distance) | Approximately 100m (line-of-sight distance) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
