All Categories
History
Price (excluding tax)
Relatively Fast Response
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Bending radius of sensor part
FBG reflection wavelength
Fiber type
Gauge length
Hand width (FWHM), reflectance, sidelobe suppression
Input/output cable bending radius
Input/output cable length
Input/output cable type
Input/output connector
Insertion loss
Installation method
K factor
Main material
Measuring range
Operating humidity, storage humidity
Operating temperature
Optical fiber cladding diameter/covering diameter
Resolution
Sensitivity
Size
Storage temperature
Temperature cross sensitivity
Weight
Part Number
FS62WSR (with braided cable)Handling Company
Hottinger Brüel & KjærCategories
| Image | Price (excluding tax) | Bending radius of sensor part | FBG reflection wavelength | Fiber type | Gauge length | Hand width (FWHM), reflectance, sidelobe suppression | Input/output cable bending radius | Input/output cable length | Input/output cable type | Input/output connector | Insertion loss | Installation method | K factor | Main material | Measuring range | Operating humidity, storage humidity | Operating temperature | Optical fiber cladding diameter/covering diameter | Resolution | Sensitivity | Size | Storage temperature | Temperature cross sensitivity | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | >300mm (At room temperature, the Bragg wavelength can vary by about ±1 nm at maximum bending radius. As the Bragg wavelength increases, bending radii of up to 10cm are allowed) | 1,500~1,600nm (±1) | SMF-28 compatible | 36mm | ≤0.3nm, 21±4%, >10dB | >16mm (When tested by winding the cable around a mandrel (cylindrical reel with a radius of 16mm or 30mm), the induction loss during one revolution is less than 0.05dB) | 0.5~6m | Φ1mm braid (glass fiber, silicone varnish) | FC/APC, SC/APC, NC (no connector) | 0.2 dB (typical for standard telecom fiber (ITU-TG.652.D) without connector and dual splice) | Spot welding (please use low power, 20~70V, 26~80W for spot welding machine) | 0.76±0.02 | Stainless steel, epoxy, Ormocer® (the complete sensor configuration including cable is RoHS, REACH, Conflict Minerals and Fire Propagation Directive compliant) | ±2,000μm/m (0.2%) | ＜95% | -40~+100℃ | 125/195μm | 0.5μm/m (Resolution 0.5pm in wavelength measurement is the value obtained by interrogator FS22SI) | 1.2pm/ (μm/m) (Typical value. Value for FBG with wavelength 1,550nm.) | 67.1±1×60.6±1×2.6±0.5mm | -20~+80℃ (limited by connector) | 7.5±1 (μm/m) /℃ (Temperature cross sensitivity (TCS) is the thermal strain induced when the temperature fluctuates by 1℃) | 8g (Weight when cable length is 2m and there are no connectors at both ends) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
![Optical fiber cord/cable [Single core] Optical patch cord-Alp Systems Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006900202410291.png)
![Optical fiber cord/cable [2 core] Optical patch cord-Alp Systems Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006900202410292.png)
