All Categories
History
Price (excluding tax)
Relatively Fast Response
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Bending radius of sensor part
FBG reflection wavelength
Fiber type
Gauge length
Hand width (FWHM), reflectance, sidelobe suppression
Input/output cable bending radius
Input/output cable length
Input/output cable type
Input/output connector
Insertion loss
Installation method
K factor
Main material
Measuring range
Operating humidity, storage humidity
Operating temperature
Optical fiber cladding diameter/covering diameter
Resolution
Sensitivity
Size
Storage temperature
Temperature cross sensitivity
Weight
Part Number
FS62WSR (with Amilad or Armored cable)Handling Company
Hottinger Brüel & KjærCategories
| Image | Price (excluding tax) | Bending radius of sensor part | FBG reflection wavelength | Fiber type | Gauge length | Hand width (FWHM), reflectance, sidelobe suppression | Input/output cable bending radius | Input/output cable length | Input/output cable type | Input/output connector | Insertion loss | Installation method | K factor | Main material | Measuring range | Operating humidity, storage humidity | Operating temperature | Optical fiber cladding diameter/covering diameter | Resolution | Sensitivity | Size | Storage temperature | Temperature cross sensitivity | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | >400mm | 1,500~1,600nm (±1) | SMF-28 compatible | 36mm | ≤0.3nm, 21±4%, >10dB | >30mm (When tested by winding the cable around a mandrel (cylindrical reel with a radius of 16mm or 30mm), the induction loss during one rotation is less than 0.05dB) | 0.5~20m | Φ3mm aramid cable (Hytrel, Kevlar®, LSZH) or Φ3mm armored cable (Hytrel, stainless steel spiral, Kevlar®, stainless mesh, LDPE) | FC/APC, SC/APC, NC (no connector) | 0.2 dB (typical for standard telecom fiber (ITU-TG.652.D) without connector and dual splice) | Spot welding (Please use low power 20~70V, 26~80W for spot welding machine) | 0.76±0.02 | Stainless steel, epoxy, Ormocer® (the complete sensor configuration including cable is RoHS, REACH, Conflict Minerals and Fire Propagation Directive compliant) | ±2,000μm/m (0.2%) | ＜95% | -20~+80℃ (In environments exceeding 60℃, creep values exceeding 0.5% may be observed) | 125/195μm | 0.5μm/m (Resolution 0.5pm in wavelength measurement is the value obtained by interrogator FS22SI) | 1.2pm/ (μm/m) (Typical value. Value for FBG with wavelength 1,550nm.) | 72.0±1×67.1±1×6.1±0.5mm, sensor board thickness: 0.1mm | -20~+80℃ (In environments exceeding 60℃, creep values exceeding 0.5% may be observed) | 6.6±1 (μm/m) /℃ (Temperature cross sensitivity (TCS) is the thermal strain induced when the temperature fluctuates by 1℃) | Aramid: 31g, Armor: 62g (weight with 2m long cable on both sides and without connector) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
![Optical fiber cord/cable [Single core] Optical patch cord-Alp Systems Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006900202410291.png)
![Optical fiber cord/cable [2 core] Optical patch cord-Alp Systems Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006900202410292.png)
