All Categories
History
Price (excluding tax)
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Bending radius of sensor part
FBG reflection wavelength
Fiber type
Gauge length
Hand width (FWHM), reflectance, sidelobe suppression
Impact resistance (at 50g SRS)
Input/output cable bending radius
Input/output cable length
Input/output cable type
Input/output connector
Installation method
K factor
Lateral sensitivity
Main material
Measuring range
Operating humidity, storage humidity
Operating temperature, storage temperature
Optical fiber cladding diameter/covering diameter
Resolution
Sensitivity
Size
Thermal strain
Weight
Part Number
FS62WSS (with aramid fiber reinforcement or armored cable)Handling Company
Hottinger Brüel & KjærCategories
| Image | Price (excluding tax) | Bending radius of sensor part | FBG reflection wavelength | Fiber type | Gauge length | Hand width (FWHM), reflectance, sidelobe suppression | Impact resistance (at 50g SRS) | Input/output cable bending radius | Input/output cable length | Input/output cable type | Input/output connector | Installation method | K factor | Lateral sensitivity | Main material | Measuring range | Operating humidity, storage humidity | Operating temperature, storage temperature | Optical fiber cladding diameter/covering diameter | Resolution | Sensitivity | Size | Thermal strain | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | Bendable up to R400 | 1,500~1,600nm (±0.75) | SMF-28 compatible | 40mm | ≦Over 0.3nm, 21±4%, Over 10dB | >10^4 number of cycles | Bendable up to R30 | 0.5~20m | Φ3mm aramid fiber reinforced cable (Hytrel, Kevlar®, LSZH) or Φ3mm armored cable (Hytrel, stainless steel spiral, Kevlar®, stainless steel woven mesh, LDPE) | FC/APC, SC/APC, NC (no connector) | By spot welding | 0.76±0.03 | <2% | Stainless steel, epoxy, Ormocer® | ±5,000μm/m (0.5%) | Operating humidity: 100% or less, storage humidity: less than 95% | -20~+80℃ (If the temperature exceeds 60℃, the deformation due to creep may exceed 0.5%.) | 125/195μm | 0.5μm (Resolution 0.5pm in wavelength measurement is the value obtained by interrogator FS22SI) | 1.2pm/ (μm/m) (Typical value. Value at FBG with wavelength 1,550nm) | 83±1×23±1×6±0.5mm | 7.6±1 (μm/m)/℃ | Φ3mm aramid fiber reinforced cable: 19, Φ3mm armored cable: 63 |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
![Optical fiber cord/cable [Single core] Optical patch cord-Alp Systems Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006900202410291.png)
![Optical fiber cord/cable [2 core] Optical patch cord-Alp Systems Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006900202410292.png)
