All Categories

History


Price (excluding tax)

Estimate Required


Model Description

An enamel paint with excellent durability and leveling. ■Features ・Does not contain lead and the 13 substances for which the Ministry of Health, Labor and Welfare has specified indoor guideline values. ・Not subject to the PRTR Chemical Substances Emission Monitoring and Management Promotion Act. ・Excellent meat retention and leveling. It is also possible to match the color. - Matte settings: glossy, 30% off, 50% off, 70% off, 100% off ■Precautions for use ・Please paint on materials with a moisture content of 20% or less. ・Drying and recoating times vary depending on conditions such as temperature and humidity. Also, please note that changing coating conditions such as application amount and dilution may lead to color blurring. ・While working, please use safety glasses, gloves, and a mask, and ensure good ventilation. ・Please store both A and B liquids under low temperature and low humidity conditions, preferably above 5℃. Long-term storage at temperatures above 50℃ may cause problems such as bumps. ・Adhering to the mixing ratio, measure liquid A, liquid B, and thinner by weight, stir evenly, and then apply. ・Please dilute 40-50% before use. (Using undiluted solution may cause foaming.) ・Please use Safety Waltz polyurethane thinner for dilution. If you use a thinner with low solubility or a thinner that dries too quickly, it may cause problems such as a shortened pot life or easy foaming. ・Shake liquid A well before use. Also, liquid B reacts with moisture in the air. Be sure to close the bottle tightly after use and store it. ・When changing colors, thoroughly clean spray equipment and other equipment and be careful not to cause contamination. ・Please be careful about thickening after mixing. If a thickened paint is applied, the gloss of the paint will disappear, resulting in paint defects such as poor interlayer adhesion, cracks, and decreased physical performance. ・Do not dispose of paint waste or washing liquid into sewers, etc. Please dispose of it according to the disposal method of your local government. ・For handling of other paints, please refer to the SDS, precautions on the can, etc. ・This content is subject to change without notice. Thank you for your understanding.


Model Filter

You can search for other models from each index. The displayed value is the value of the currently selected part number.

Dilution rate

Dry to the touch

Drying time (recoating time)

Exterior

Kinds

Mixing ratio

Packing style

Painting method

Polishing time

Pot life

Solvent resistance

Standard application amount

Viscosity

Coating conditions 23℃ Application amount (g/shaku2)

Coating conditions: 23℃ Number of coatings

Drying time

Acid resistance

Alkali resistance

Impact resistance

Moist heat

Pencil hardness

Repeated cold and fever

Shiatsu drying

See all 10 models in list
  • Part Number

    Safety Waltz Elegant Color #2000 Various colors A liquid

Share this product


620+ people viewing

Last viewed: 6 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

Factory painted product Urethane enamel Safety Waltz Elegant Color #2000 Various colors A liquid's performance table

Image Price (excluding tax) Acid resistance Alkali resistance Dilution rate Dry to the touch Exterior Impact resistance Kinds Mixing ratio Moist heat Packing style Painting method Pencil hardness Pot life Repeated cold and fever Shiatsu drying Standard application amount
Available upon quote No change (5% acetic acid spot, washed with water after 6 hours) No change (washed with water after 6 hours with 5% sodium carbonate) 40~50% of A+B (diluted with Safety Waltz polyurethane thinner) 10~15 minutes (10g/shaku2) A liquid various colors B liquid colorless and transparent No abnormality (Dupont 30cm x 300g x 1/2) Urethane enamel (2-component urethane paint topcoat) A liquid: B liquid = 5:1 No abnormalities (left on boiling water for 15 minutes) 18kg set/4.2kg set Spray 2H (JIS K-5600 Mitsubishi Uni base material: steel plate) *Coating film hardness will vary depending on the hardness of the base etc. 3 hours (23℃ 40% dilution) No change for 6 cycles (80℃ x 2 hours ⇔ -20℃ x 2 hours) Approximately 1 hour (10g/shaku2) 8~10g/shaku2

There are 10 models for this product.

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Urethane Paints Products

Other products of Otani Paint Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Otani Paint Co., Ltd.

About Company Handling This Product

Category of this product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree