All Categories
History
Price (excluding tax)
This is an undercoat paint exclusively for enamel finishing of MDF materials, etc. ■Features ・Does not contain lead and the 13 substances for which the Ministry of Health, Labor and Welfare has specified indoor guideline values. ・It has a good yield even with MDF materials, and has excellent drying properties, hiding properties, and anti-sagging properties (suitable for elevation painting). ■Painting process example (MDF material, enamel finish) Wood polishing (P180-P240 paper) → Undercoat (Safety Waltz Urebon Surfacer MDF Undercoat White Liquid A 100/Safety Waltz Urebon Surfacer MDF Undercoat B Liquid 50/Safety Waltz Polyurethane Thinner 45) → Paint film polishing (P320 Paper ) → Intermediate coating (Safety Waltz Urebon Sanding Attack MX Part A 100/ Part B 50/Safety Waltz Polyurethane Thinner 75) → Paint film polishing (P320 to P400 paper) → Top coat (Safety Waltz Elegant Color #2000 White 100% eraser Part A 100/Safety Waltz Elegant Color #2000 NY Part B 20/Safety Waltz Polyurethane Thinner 60) ■Precautions for use ・Please paint on materials with a moisture content of 20% or less. ・Drying and recoating times vary depending on conditions such as temperature and humidity. ・While working, please use safety glasses, gloves, and a mask, and ensure good ventilation. ・Adhering to the mixing ratio, measure liquid A, liquid B, and thinner by weight, stir evenly, and then apply. Please note that liquid A has a very high viscosity, so please loosen any clumps when stirring before use. Additionally, this product has a shorter pot life due to its increased curing properties. Please use the minimum necessary amount. ・When using, please dilute according to the painting method. (Using undiluted solution may cause foaming.) ・Please use Safety Waltz polyurethane thinner for dilution. If you use a thinner with low solubility or a thinner that dries too quickly, it may cause problems such as shortening the pot life or making it easier to foam. ・Shake liquid A well before use. Also, liquid B reacts with moisture in the air. Be sure to close the bottle tightly after use and store it.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Dilution rate
Dry to the touch
Drying time (recoating time)
Exterior
Kinds
Mixing ratio
Packing style
Painting method
Polishing time
Pot life
Solvent resistance
Standard application amount
Viscosity
Coating conditions 23℃ Application amount (g/shaku2)
Coating conditions: 23℃ Number of coatings
Drying time
Acid resistance
Alkali resistance
Impact resistance
Moist heat
Pencil hardness
Repeated cold and fever
Shiatsu drying
Part Number
Safety Waltz Urebon Surfacer for MDF Undercoat Black A LiquidHandling Company
Otani Paint Co., Ltd.Categories
| Image | Price (excluding tax) | Coating conditions 23℃ Application amount (g/shaku2) | Coating conditions: 23℃ Number of coatings | Dilution rate | Dry to the touch | Drying time | Drying time (recoating time) | Exterior | Kinds | Mixing ratio | Packing style | Painting method | Polishing time | Pot life | Solvent resistance | Standard application amount | Viscosity |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Available upon quote | 10~12 | 1~3 | 20~30% of A+B (diluted with Safety Waltz polyurethane thinner) *Please use a gun diameter of 2~2.5mm. | 6±2 minutes (23℃, 120μ applicator) | 1 hour or more | 1 to 8 hours (2-component urethane paint for enamel undercoat, 2-component urethane paint for intermediate coat, enamel) | Liquid A: white, black, cloudy gray B liquid slightly yellow transparent | Undercoat for urethane enamel | A liquid: B liquid = 2:1 | 22.5kg set | Spray | After 1 hour (hand polished) | 1.5 hours (23℃ 20% dilution) | Insoluble (swells) after 1 night *Safety Waltz Uses polyurethane thinner | 10~12g/shaku2 | 14±2 seconds (23℃, Zancup No.5 A+B stock solution) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
