All Categories

History


Price (excluding tax)

Estimate Required


Model Description

This is an undercoat paint exclusively for enamel finishing of MDF materials, etc. ■Features ・Does not contain lead and the 13 substances for which the Ministry of Health, Labor and Welfare has specified indoor guideline values. ・It has a good yield even with MDF materials, and has excellent drying properties, hiding properties, and anti-sagging properties (suitable for elevation painting). ■Painting process example (MDF material, enamel finish) Wood polishing (P180-P240 paper) → Undercoat (Safety Waltz Urebon Surfacer MDF Undercoat White Liquid A 100/Safety Waltz Urebon Surfacer MDF Undercoat B Liquid 50/Safety Waltz Polyurethane Thinner 45) → Paint film polishing (P320 Paper ) → Intermediate coating (Safety Waltz Urebon Sanding Attack MX Part A 100/ Part B 50/Safety Waltz Polyurethane Thinner 75) → Paint film polishing (P320 to P400 paper) → Top coat (Safety Waltz Elegant Color #2000 White 100% eraser Part A 100/Safety Waltz Elegant Color #2000 NY Part B 20/Safety Waltz Polyurethane Thinner 60) ■Precautions for use ・Please paint on materials with a moisture content of 20% or less. ・Drying and recoating times vary depending on conditions such as temperature and humidity. ・While working, please use safety glasses, gloves, and a mask, and ensure good ventilation. ・Adhering to the mixing ratio, measure liquid A, liquid B, and thinner by weight, stir evenly, and then apply. Please note that liquid A has a very high viscosity, so please loosen any clumps when stirring before use. Additionally, this product has a shorter pot life due to its increased curing properties. Please use the minimum necessary amount. ・When using, please dilute according to the painting method. (Using undiluted solution may cause foaming.) ・Please use Safety Waltz polyurethane thinner for dilution. If you use a thinner with low solubility or a thinner that dries too quickly, it may cause problems such as shortening the pot life or making it easier to foam. ・Shake liquid A well before use. Also, liquid B reacts with moisture in the air. Be sure to close the bottle tightly after use and store it.


Model Filter

You can search for other models from each index. The displayed value is the value of the currently selected part number.

Dilution rate

Dry to the touch

Drying time (recoating time)

Exterior

Kinds

Mixing ratio

Packing style

Painting method

Polishing time

Pot life

Solvent resistance

Standard application amount

Viscosity

Coating conditions 23℃ Application amount (g/shaku2)

Coating conditions: 23℃ Number of coatings

Drying time

Acid resistance

Alkali resistance

Impact resistance

Moist heat

Pencil hardness

Repeated cold and fever

Shiatsu drying

See all 10 models in list
  • Part Number

    Safety Waltz Urebon Surfacer for MDF Undercoat White A liquid

Share this product


620+ people viewing

Last viewed: 6 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

Factory painted product Urethane enamel Safety Waltz Urebon Surfacer for MDF Undercoat White A liquid's performance table

Image Price (excluding tax) Coating conditions 23℃ Application amount (g/shaku2) Coating conditions: 23℃ Number of coatings Dilution rate Dry to the touch Drying time Drying time (recoating time) Exterior Kinds Mixing ratio Packing style Painting method Polishing time Pot life Solvent resistance Standard application amount Viscosity
Available upon quote 10~12 1~3 20~30% of A+B (diluted with Safety Waltz polyurethane thinner) *Please use a gun diameter of 2~2.5mm. 6±2 minutes (23℃, 120μ applicator) 1 hour or more 1 to 8 hours (2-component urethane paint for enamel undercoat, 2-component urethane paint for intermediate coat, enamel) Liquid A: white, black, cloudy gray B liquid slightly yellow transparent Undercoat for urethane enamel A liquid: B liquid = 2:1 22.5kg set Spray After 1 hour (hand polished) 1.5 hours (23℃ 20% dilution) Insoluble (swells) after 1 night *Safety Waltz Uses polyurethane thinner 10~12g/shaku2 14±2 seconds (23℃, Zancup No.5 A+B stock solution)

There are 10 models for this product.

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Urethane Paints Products

Other products of Otani Paint Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Otani Paint Co., Ltd.

About Company Handling This Product

Category of this product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree