All Categories

History


Price (excluding tax)

Estimate Required


Model Description

This is an undercoat paint suitable for enamel finishing of rubber materials, MDF materials, etc. ■Features ・Does not contain lead and the 13 substances for which the Ministry of Health, Labor and Welfare has specified indoor guideline values. ・It has a good yield even with materials that are easily absorbed, such as MDF, and has excellent concealment and polishing properties. ■Precautions for use ・Please paint on materials with a moisture content of 20% or less. ・Drying and recoating times vary depending on conditions such as temperature and humidity. ・While working, please use safety glasses, gloves, and a mask, and ensure good ventilation. ・Please store both A and B liquids under low temperature and low humidity conditions, preferably above 5℃. Long-term storage at temperatures above 50℃ may cause problems such as bumps. ・Adhering to the mixing ratio, measure liquid A, liquid B, and thinner by weight, stir evenly, and then apply. ・When using, please dilute according to the painting method. (Using undiluted solution may cause foaming.) ・Please use Safety Waltz polyurethane thinner for dilution. If you use a thinner with low solubility or a thinner that dries too quickly, it may cause problems such as a shortened pot life or easy foaming. ・Shake liquid A well before use. Also, liquid B reacts with moisture in the air. Be sure to close the bottle tightly after use and store it. -This product tends to be thicker than regular intermediate paints. When applying thick coats (more than 10g/shaku2), especially at high temperatures of 35°C or higher, add approximately 5% of Safety Waltz Urethane Retarder No. 6 to liquid A to slow down surface drying. ・This product is not a non-yellowing type. If yellowing is a problem with white finishes, etc., be sure to apply urethane enamel after applying this product. If you apply urethane paint, top coat, etc. directly after painting this product, it may yellow significantly. (Marble pattern finish is also not available) ・Do not dispose of paint waste or washing liquid into sewers, etc. Please dispose of it according to the disposal method of your local government. ・For handling of other paints, please refer to the SDS, precautions on the can, etc. ・This content is subject to change without notice. Thank you for your understanding. *Please use a cup gun for dilution rate and a gun diameter of 1.5 to 2 mm for pressure feeding.


Model Filter

You can search for other models from each index. The displayed value is the value of the currently selected part number.

Dilution rate

Dry to the touch

Drying time (recoating time)

Exterior

Kinds

Mixing ratio

Packing style

Painting method

Polishing time

Pot life

Solvent resistance

Standard application amount

Viscosity

Coating conditions 23℃ Application amount (g/shaku2)

Coating conditions: 23℃ Number of coatings

Drying time

Acid resistance

Alkali resistance

Impact resistance

Moist heat

Pencil hardness

Repeated cold and fever

Shiatsu drying

See all 10 models in list
  • Part Number

    Safety Waltz Urebon Surfacer SP Black A liquid

Share this product


620+ people viewing

Last viewed: 6 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

Factory painted product Urethane enamel Safety Waltz Urebon Surfacer SP Black A liquid's performance table

Image Price (excluding tax) Dilution rate Dry to the touch Drying time (recoating time) Exterior Kinds Mixing ratio Packing style Painting method Polishing time Pot life Solvent resistance Standard application amount Viscosity
Available upon quote 20~30% for A+B (cup gun, pressure feeding) 20% for A+B (brush) 10~20% of A+B (airless) *All safety waltz diluted with polyurethane thinner 13±3 minutes (23℃, 120μ applicator) 1 to 8 hours (2-component urethane paint for enamel undercoat, 2-component urethane paint for intermediate coat, enamel) Liquid A: white, black, cloudy gray B liquid colorless and transparent Undercoat for urethane enamel A liquid: B liquid = 4:1 19kg set/5kg set Spray (including pressure feeding and airless), brush After 1 hour (hand polished) Approximately 6 hours (23℃ 20% dilution) Insoluble (swells) after 1 night *Safety Waltz Uses polyurethane thinner 10~12g/shaku2 28±4 seconds (23℃, Zancup No.5 A+B stock solution)

There are 10 models for this product.

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Urethane Paints Products

Other products of Otani Paint Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Otani Paint Co., Ltd.

About Company Handling This Product

Category of this product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree