All Categories
History
Price (excluding tax)
A top coat with excellent durability and transparency. ■Features ・Does not contain lead and the 13 substances for which the Ministry of Health, Labor and Welfare has specified indoor guideline values. - Has excellent durability and transparency, making it ideal for flat surface painting. ・It hides the paper grains well when polishing the base, making it especially suitable for building materials with complex shapes and large polishing areas. ■Precautions for use ・Please paint on materials with a moisture content of 20% or less. ・Drying and recoating times vary depending on conditions such as temperature and humidity. ・While working, please use safety glasses, gloves, and a mask, and ensure good ventilation. ・Please store both A and B liquids under low temperature and low humidity conditions, preferably above 5℃. Long-term storage at temperatures above 50℃ may cause problems such as spots and discoloration. ・Adhering to the mixing ratio, measure liquid A, liquid B, and thinner by weight, stir evenly, and then apply. . Insufficient stirring may cause abnormal matting or uneven gloss. ・When using, please dilute according to the painting method. Please avoid using undiluted solution as it may cause foaming. ・Please use Safety Waltz polyurethane thinner for dilution. If you use a thinner with low solubility or a thinner that dries too quickly, it may cause problems such as shortening the pot life or making it easier to foam. ・Shake liquid A well before use. Also, liquid B reacts with moisture in the air. Be sure to close the bottle tightly after use and store it. ・If you use half of Part A, the paint (dried) on the inner wall of the can may become lumpy during painting, so be sure to filter it with Yoshino paper before use. . ・Do not dispose of paint waste or washing liquid into sewers, etc. Please dispose of it according to the disposal method of your local government. ・For handling of other paints, please refer to the SDS, precautions on the can, etc. ・This content is subject to change without notice. Thank you for your understanding.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Acid resistance
Adhesion (edge)
Alcohol resistance
Alkali resistance
Dilution rate
Dry to the touch
Exterior
Flexibility
Formaldehyde emission grade classification display
Impact resistance
Mixing ratio
Moist heat
Packing style
Painting method
Pencil hardness
Pot life
Repeated cold and fever
Shiatsu drying
Stain resistance source
Stain resistance soy sauce
Stain resistant crayon red
Stain resistant lipstick
Stain resistant magic black
Stain resistant magic red
Stain resistant whiskey
Standard application amount
Viscosity
Part Number
Safety Waltz Urebon Flat Hi-wrap 30% quencher A liquidHandling Company
Otani Paint Co., Ltd.Categories
| Image | Price (excluding tax) | Acid resistance | Adhesion (edge) | Alcohol resistance | Alkali resistance | Dilution rate | Dry to the touch | Exterior | Flexibility | Formaldehyde emission grade classification display | Impact resistance | Mixing ratio | Moist heat | Packing style | Painting method | Pencil hardness | Pot life | Repeated cold and fever | Shiatsu drying | Stain resistance source | Stain resistance soy sauce | Stain resistant crayon red | Stain resistant lipstick | Stain resistant magic black | Stain resistant magic red | Stain resistant whiskey | Standard application amount | Viscosity |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Available upon quote | No change (washed with water after 6 hours with 5% acetic acid) | 100/100 (urethane sanding, polysan, polysaf) | No change (60% ethanol spot, washed with water after 6 hours) | No change (washed with water after 6 hours with 5% sodium carbonate) | 40~50% of A+B (diluted with Safety Waltz polyurethane thinner) | Approximately 10 minutes (8g/shaku2) | Liquid A cloudy white B liquid colorless and transparent | 2mmφ (mandrel bending test) | F☆☆☆☆ | No abnormality (Dupont 50cm x 300g) | A liquid: B liquid = 2:1 | No abnormality (left on boiling water for 30 minutes) | 45kg set/22.5kg set/6kg set | Spray | H (JIS K-5600 Mitsubishi Uni base material: Bakelite) | 3~4 hours (23℃ 50% dilution) | No change for 6 cycles (80℃ x 2 hours ⇔ -20℃ x 2 hours) | Approximately 25 minutes (8g/shaku2) | No change (24 hour spot wash) | No change (24 hour spot wash) | No change (wiped with neutral detergent 24 hours after drawing) | No change (wiped with neutral detergent 24 hours after drawing) | No change (24 hours after drawing, wiped with benzine) | No change (24 hours after drawing, wiped with benzine) | No change (24 hour spot wash) | 7~9g/shaku2 | 18±2 (23℃, IHS cup A+B stock solution) 10±1 seconds (23℃, IHS cup A+B 50% dilution) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
