All Categories
History
Price (excluding tax)
Acrylic intermediate paint with long pot life and quick drying at low temperatures. ■Features ・Does not contain lead and the 13 substances for which the Ministry of Health, Labor and Welfare has established indoor guideline values. ・Excellent pot life and low temperature drying properties. ・Achieves a clean finish with less lumpiness. - Suitable for finishing with less wet feeling. ■Precautions for use ・Please paint on materials with a moisture content of 20% or less. ・Drying and recoating times vary depending on conditions such as temperature and humidity. ・While working, please use safety glasses, gloves, and a mask, and ensure good ventilation. ・Please store both A and B liquids under low temperature and low humidity conditions, preferably above 5℃. Long-term storage at temperatures above 50℃ may cause problems such as bumps. ・Adhering to the mixing ratio, measure liquid A, liquid B, and thinner by weight, stir evenly, and then apply. ・Please dilute 30-50% before use. (Using undiluted solution may cause foaming.) ・Please use Safety Waltz polyurethane thinner for dilution. If you use a thinner with low solubility or a thinner that dries too quickly, it may cause problems such as shortening the pot life or making it easier to foam. ・Shake liquid A well before use. Also, liquid B reacts with moisture in the air. Be sure to close the bottle tightly after use and store it. - Not suitable for cases where a wet feel is required, close finishing of materials with deep conduits, or mirror finishing. Please select a different type of intermediate coating. ・For handling of other paints, please refer to the SDS, precautions on the can, etc. ・Do not dispose of paint waste or washing liquid into sewers, etc. Please dispose of it according to the disposal method of your local government. ・This content is subject to change without notice. Thank you for your understanding.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Coating conditions: 23℃ Number of coatings
Color
Dilution rate
Dry to the touch
Drying time
Drying time (recoating time)
Mixing ratio
Packing style
Painting method
Polishing time
Pot life
Shiatsu drying
Solvent resistance
Standard application amount
Viscosity
Spray tip caliber
Part Number
Safety Waltz Urethane Sanding DC-7 B LiquidHandling Company
Otani Paint Co., Ltd.Categories
| Image | Price (excluding tax) | Color | Dilution rate | Dry to the touch | Drying time (recoating time) | Mixing ratio | Packing style | Painting method | Polishing time | Pot life | Shiatsu drying | Solvent resistance | Standard application amount | Viscosity |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Available upon quote | Liquid A cloudy white B liquid colorless and transparent | 30~50% of A+B (diluted with Safety Waltz polyurethane thinner) | 8±1 min (10g/shaku2) | 2.5~4 hours (2-component urethane paint, intermediate coat, top coat) | A liquid: B liquid = 2:1 | 22.5kg set/6kg set | Spray | After 30 minutes (hand polishing) | Approximately 5 hours (23℃ 30% dilution) | Approximately 30 minutes (10g/shaku2) | Insoluble (swells) after one night (using Safety Waltz polyurethane thinner) | 8~10g/shaku2 | 15 seconds (23℃, No.4 Ford Cup A+B stock solution) 9 seconds (23℃, IHS cup A+B 30% dilution) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
