All Categories

History


Price (excluding tax)

Estimate Required


Model Description

An intermediate coating with excellent transparency, polishing properties, and anti-sagging properties (suitable for elevation painting). ■Features ・Does not contain lead and the 13 substances for which the Ministry of Health, Labor and Welfare has established indoor guideline values. ・Since it flows well into the conduit, a clean finish with less lumpiness can be obtained. ・Since the blending ratio is 1:1 (A:B), it is easy to handle and has excellent coating film transparency, polishing properties, and anti-sagging properties (suitable for elevation painting). ■Painting process example (oak wood, semi-open finish) Wood polishing (P180-P240 paper) → Sealing coloring (Safety Waltz New PGA Wiping Base 100/Safety Waltz Wiping Thinner #150 as appropriate/Safety Waltz Justly Color as appropriate) → Intermediate coating (Safety Waltz Urebone Sanding Anchor # 107 Liquid A 100/Liquid B 100/Safety Waltz Polyurethane Thinner 60) → Paint film polishing (P320 to P400 paper) → Paint film coloring (Safety Waltz 1001 Antique Clear 100/Safety Waltz Polyurethane Thinner 100/Safety Waltz Justly Color as appropriate) → Topcoat (Safety Waltz Urebone Flat One Grade Each Matte A) Liquid 80/B liquid 20/Safety Waltz Polyurethane Thinner 75) ■Precautions for use ・Please paint on materials with a moisture content of 20% or less. ・Drying and recoating times vary depending on conditions such as temperature and humidity. ・While working, please use safety glasses, gloves, and a mask, and ensure good ventilation. ・Please store both A and B liquids under low temperature and low humidity conditions, preferably above 5℃. Long-term storage at temperatures above 50℃ may cause problems such as bumps. ・Adhering to the mixing ratio, measure liquid A, liquid B, and thinner by weight, stir evenly, and then apply. ・When using, please dilute according to the painting method. ・Shake liquid A well before use. Also, liquid B reacts with moisture in the air. Be sure to close the bottle tightly after use and store it. ・Do not dispose of paint waste or washing liquid into sewers, etc. Please dispose of it according to the disposal method of your local government. ・For handling of other paints, please refer to the SDS, precautions on the can, etc. ・This content is subject to change without notice. Thank you for your understanding.


Model Filter

You can search for other models from each index. The displayed value is the value of the currently selected part number.

Coating conditions: 23℃ Number of coatings

Color

Dilution rate

Dry to the touch

Drying time

Drying time (recoating time)

Mixing ratio

Packing style

Painting method

Polishing time

Pot life

Shiatsu drying

Solvent resistance

Standard application amount

Viscosity

Spray tip caliber

See all 10 models in list
  • Part Number

    Safety Waltz Urethane Sanding Anchor #107 B Liquid

Share this product


690+ people viewing

Last viewed: 35 minutes ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

Factory painted product 2-component urethane paint intermediate coating (urethane sanding) Safety Waltz Urethane Sanding Anchor #107 B Liquid's performance table

Image Price (excluding tax) Coating conditions: 23℃ Number of coatings Color Dilution rate Dry to the touch Drying time Drying time (recoating time) Mixing ratio Packing style Painting method Polishing time Pot life Shiatsu drying Solvent resistance Spray tip caliber Standard application amount Viscosity
Available upon quote 1~2 Liquid A pale yellow cloudy color B liquid colorless and transparent 10~30% of A+B (Cup gun, pressure feed, airless, etc./Safety Waltz Diluted with polyurethane thinner) 11±1 min (10g/shaku2) 2 hours or more 2 to 4 hours (2-component urethane paint, intermediate coat, top coat) A liquid: B liquid = 1:1 30kg set/8kg set Spray (including pressure feeding and airless) After 2 hours (hand polished) 4 hours later (belt sander polishing) Approximately 5 hours (23℃ 30% dilution) Approximately 50 minutes (10g/shaku2) Insoluble (swells) after one night (using Safety Waltz polyurethane thinner) 1.2~1.5mm (forced spray gun diameter) 8~10g/shaku2 14±1 seconds (23℃, IHS cup A+B stock solution)

There are 10 models for this product.

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Urethane Paints Products

Other products of Otani Paint Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Otani Paint Co., Ltd.

About Company Handling This Product

Category of this product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree