All Categories
History
Price (excluding tax)
An undercoat with excellent adhesiveness and anti-repellent effect. ■Features ・Does not contain lead and the 13 substances for which the Ministry of Health, Labor and Welfare has established indoor guideline values. ・Good brush handling and good anti-staining and scum-preventing effects. ・It has excellent durability and can be finished with good clogging even in materials with deep pipes. ■Precautions for use ・Please paint on materials with a moisture content of 20% or less. ・Drying and recoating times vary depending on conditions such as temperature and humidity. ・While working, please use safety glasses, gloves, and a mask, and ensure good ventilation. ・Please store both A and B liquids under low temperature and low humidity conditions, preferably above 5℃. Long-term storage at temperatures above 50℃ may cause problems such as bumps. ・Adhering to the mixing ratio, measure liquid A, liquid B, and thinner by weight, stir evenly, and then apply. ・When using, please dilute as appropriate depending on the coating method and coating machine. ・Please use Safety Waltz polyurethane thinner for dilution. If you use a thinner with low solubility or a thinner that dries too quickly, it may cause problems such as shortening the pot life or making it easier to foam. ・Polyester paint intermediate coating (non-wax type) can be applied within 4 to 40 hours after applying this paint. Be sure to polish before painting. The paintable time will vary depending on the amount of paint applied, suction caused by the material, etc. - When applying polyester paint to tar or other materials, please test thoroughly before applying the paint to the target material. ・Do not dispose of paint waste or washing liquid into sewers, etc. Please dispose of it according to the disposal method of your local government. ・For handling of other paints, please refer to the SDS, precautions on the can, etc. ・This content is subject to change without notice. Thank you for your understanding.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Coating conditions: 23℃ Number of coatings
Color
Dilution rate
Drying time
Drying time (recoating time)
Mixing ratio
Packing style
Painting method
Pot life
Solvent resistance
Standard application amount
Viscosity
Dry to the touch
Shiatsu drying
Adhesion width (no polishing)
Part Number
Safety Waltz Neo PR Sealer 50-606 A liquidHandling Company
Otani Paint Co., Ltd.Categories
| Image | Price (excluding tax) | Color | Dilution rate | Dry to the touch | Drying time (recoating time) | Mixing ratio | Packing style | Painting method | Pot life | Shiatsu drying | Standard application amount | Viscosity |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Available upon quote | Liquid A pale yellow transparent B liquid colorless and transparent | Brush, airless: 30~50% of A+B (diluted with Safety Waltz polyurethane thinner) Cup gun: 10~30% of A+B (diluted with Safety Waltz polyurethane thinner) | 15±5 minutes (8~10g/shaku2) | 4 hours (2-component urethane paint, undercoat, intermediate coat/polyester paint, intermediate coat, non-wax type) | A liquid: B liquid = 1:1 | 30kg set/8kg set | Brush, spray (including airless) | Approximately 4.5 hours (23℃ 10% dilution) | Approximately 3 hours (8~10g/shaku2) | 8~10g/shaku2 | 8±1 seconds (23℃, IHS cup stock solution) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
