All Categories
History
Price (excluding tax)
A standard undercoat with excellent clogging properties (duct filling properties). ■Features ・Does not contain lead and the 13 substances for which the Ministry of Health, Labor and Welfare has established indoor guideline values. ・It has good clogging properties (filling power into the conduit) and prevents foaming, pinholes, and eye drops. ・2-component urethane paint Has excellent drying properties among undercoats. ■Painting process example (table, rubber material, semi-closed finish) Wood polishing (P180-P240 paper) → Sealing coloring (Safety Waltz Neo Hybrid Filler SPF 100/Safety Waltz #150 Wiping Thinner as appropriate/Safety Waltz Justly Color as appropriate) → Undercoat (Safety Waltz ZD Scrum Undercoat #130A Liquid 100 /B liquid 100/Safety Waltz Polyurethane thinner 100) →Paint polishing (P320 paper) →Intermediate coating (Safety Waltz Hybrid Sanding Liquid A 100/Liquid B 50/Safety Waltz Polyurethane Thinner 40) →Pain polishing (P320~P400 Paper) →Top coating (Safety Waltz Urebone Flat One Grade) Each matte A liquid 80/B liquid 20/Safety Waltz Polyurethane thinner 75) ■Precautions for use ・Please paint on materials with a moisture content of 20% or less. ・Drying and recoating times vary depending on conditions such as temperature and humidity. ・While working, please use safety glasses, gloves, and a mask, and ensure good ventilation. ・Adhering to the mixing ratio, measure liquid A, liquid B, and thinner by weight, stir evenly, and then apply. ・Please dilute 30-50% before use. (Using undiluted solution may cause foaming.) ・Please use Safety Waltz polyurethane thinner for dilution. If you use a thinner with low solubility or a thinner that dries too quickly, it may cause problems such as shortening the pot life or making it easier to foam. ・Polyester paint intermediate coating (non-wax type) can be applied within 2 to 30 hours after application of Safety Waltz ZD Scrum Undercoat #130. Be sure to polish before painting. The paintable time will vary depending on the amount of paint applied, suction caused by the material, etc. ・This product does not adhere well to wax-type polyester paint.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Coating conditions: 23℃ Number of coatings
Color
Dilution rate
Drying time
Drying time (recoating time)
Mixing ratio
Packing style
Painting method
Pot life
Solvent resistance
Standard application amount
Viscosity
Dry to the touch
Shiatsu drying
Adhesion width (no polishing)
Part Number
Safety Waltz ZD Scrum Undercoat #130 A liquidHandling Company
Otani Paint Co., Ltd.Categories
| Image | Price (excluding tax) | Coating conditions: 23℃ Number of coatings | Color | Dilution rate | Drying time | Drying time (recoating time) | Mixing ratio | Packing style | Painting method | Pot life | Solvent resistance | Standard application amount | Viscosity |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Available upon quote | 1 | Liquid A light brown turbid color B liquid pale yellow transparent | 30~50% of A+B (diluted with Safety Waltz polyurethane thinner) | 1 hour or more | 1 hour (2-component urethane paint, intermediate coat, top coat) 2 hours (polyester paint, intermediate coating, non-wax type) | A liquid: B liquid = 1:1 | 30kg set/8kg set | Spray | Approximately 3.5 hours (23℃ 50% dilution) | Insoluble (swells) after one night (using Safety Waltz polyurethane thinner) | 8~10g/shaku2 | 15±1 seconds (23℃, IHS cup A+B stock solution) 11 seconds (23℃, IHS cup A+B 30% dilution) 9.5 seconds (23℃, IHS cup A+B 50% dilution) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
