All Categories
History
Price (excluding tax)
Wireless muscle electric sensor wet+acceleration The wireless muscle sensor is an easy and lightweight sensor that integrates the wireless logger and the cycle electrodes circuit. Since it is controlled by wireless, the cable does not limit the freedom of the subject. Please select the dry type/wet type according to the application. In addition, there is a built -in acceleration type, and acceleration measurement is possible while performing hydrogenolity. In addition to 32MB (1kHz sampling: 30 minutes), there is also a large capacity version (1kHz sampling: 18 hours). The measurement data is saved to the built -in memory, and data can be obtained after measurement. The waveform check in real time is also possible (ID1 to ID8). Because it has a built -in variable gain amplifier, the sensitivity of the electric electrode sensor can be changed. The built -in rechargeable battery allows 4 hours consecutive (100 Hz sampling). * If you are using the 2.4GHz series for the first time, please be sure to purchase a basic evaluation accessories pack (LP-WSEK02) with one application, driver, data transmission and reception device, etc. required for measurement. * During wireless communication, data may occur due to outer turbulence, but full data remains in the built -in flash memory.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Aerial line power
Battery life
CMRR (the same phase removal ratio)
Communication method
Distance between electrodes
Frequency characteristic
Hydraulic amplification rate
Internal memory capacity
Law
Modulation method
Sampling rate
Tremendous number
Used temperature range
Wireless
mass
power consumption
power supply
resolution
size
Acceleration range
Acceleration sensitivity
Part Number
LP-WS1224Handling Company
Logical product Co., Ltd.| Image | Price (excluding tax) | Acceleration range | Acceleration sensitivity | Aerial line power | Battery life | CMRR (the same phase removal ratio) | Communication method | Distance between electrodes | Frequency characteristic | Hydraulic amplification rate | Internal memory capacity | Law | Modulation method | Sampling rate | Tremendous number | Used temperature range | Wireless | mass | power consumption | power supply | resolution | size |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | ± 16g | 57mv/g | +5dbm or less | About 4 hours (100Hz measurement) | 94db | USB communication via wireless or communication docks by our data communication device | 20mm | 5.3Hz ~ 442Hz | 250 to 3,000 times, 250 times x1 to 250 times x12 times | 32MB, about 0.5 hours (sampling frequency 1kHz) | Wireless equipment construction design certification has been obtained | DS-SS method | Up to 1,000Hz (1Hz to 8 steps) | 3 | About 0 to 40 ° C | 2,405MHz ~ 2,480MHz (5MHz step) IEEE802.15.4/Independent protocol | 0 ~ Power supply voltage (25mA Max), about 15g (including battery weight) | Up to about 85mW | Dedicated rechargeable battery | 16 -bit | 43mm x 24mm x 12mm (not included) |
Reviews shown here are reviews of companies.
