All Categories
History
Price (excluding tax)
Response Rate
100.0%
Response Time
1.2hours
Very Fast Response
L-LOG piezoelectric speed logger Equipped with an amplifier for acceleration measurement and constant current circuit, it is possible to connect an acceleration pickup for up to 4CH. You can logging and wireless transmission of data sampled at up to 20kHz. The wireless communication distance is approximately 50m. * If you are using the L-LOG series for the first time, be sure to purchase an separately sold L-LOG data transmission / reception device and the L-LOG battery holder-CR123A. * This product is only a sensor. (SD card included)
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Aerial line power
Continuous measurement time
External dimensions
Hearm gauge connection method
Interval measurement
Measurement CH
Measurement accuracy
Measurement range
Measurement resolution
Memory capacity
Operating temperature
Power saving function
Sampling frequency
Sensor connection portion
Strain gauge resistance value
Wireless communication distance
Wireless frequency
Wireless system
power supply
Frequency response range
Maximum number of connections
Synchronous delay
thermocouple
weight
Acceleration sensor
Low -pass filter
Other functions
Sensor power supply supply
Part Number
LP-LWS200PAHandling Company
Logical product Co., Ltd.Categories
| Image | Price (excluding tax) | Acceleration sensor | Aerial line power | Continuous measurement time | External dimensions | Frequency response range | Interval measurement | Low -pass filter | Measurement CH | Measurement accuracy | Measurement range | Measurement resolution | Memory capacity | Operating temperature | Other functions | Sampling frequency | Sensor power supply supply | Wireless communication distance | Wireless frequency | Wireless system | power supply |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | Built -in amplifier -type acceleration sensor (compatible with 24V 2MA constant current power supply) | +5dbm or less | When using two CR-123A: about 10 hours (during continuous measurement 20kHz sampling) | 100 × 150 × 45mm (non -waterproof, connector, SW, etc. are not included) | 2Hz ~ 10kHz (within ± 0.5db) | Interval measurement is possible (repeated in △ per minute every time) | 10kHz/5kHz/1kHz/500Hz/100Hz/OFF (through) Switch the secondary Vessel analog filter (-12db/Oct) | 4ch (connected with a standard BNC connector) | Within ± 5 % (± 0.5dB) in each range (provisional specification) | Maximum input voltage: Switch to ± 10V/± 5V/± 2V/± 1V | ± 15bit resolution (total 16bit) in each range fluorine | External microSD memory (up to 32GB) | 0 to 40 ° C (without condensation) | CH operation display: Displays the operation status of each CH in LED | Up to 20kHz (/10kHz/2kHz/1kHz/200Hz/100Hz/50Hz/10Hz), synchronization accuracy should be within each sampling time (± 50US at 20kHz) | 24V 2ma (± 5%) | View 50m (depending on the mounting state of this unit and the surrounding environment) | 2,405MHz ~ 2,480MHz, 5MHz interval, 16 waves | 2.4GHz band specified small power (IEEE802.15.4 compliant/proprietary protocol) | Supply 5V from battery (2 CR-123A) or USB (battery is recommended for noise measures when measuring) |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
1.2hrs
