5 Threaded Rod Cutter Manufacturers in 2024
This section provides an overview for threaded rod cutters as well as their applications and principles. Also, please take a look at the list of 5 threaded rod cutter manufacturers and their company rankings. Here are the top-ranked threaded rod cutter companies as of November, 2024: 1.Robert Bosch Tool Corporation, 2.MCC Corporation, 3.Allfasteners USA LLC.
Table of Contents
What Is a Threaded Rod Cutter?
A full-thread cutter is a special tool for cutting threaded rods. These cutters come in both manual and electric types, with rechargeable (battery-powered) versions being widely used these days.
An all-thread bolt is a bolt that does not have a head like a hexagonal bolt, and its entire length is a thread. Generally, "inch-cut bolt" is also used as a synonym.
In a threaded rod cutter, a blade with threads and grooves engages the thread of a threaded bolt, and the two blades clamp and shear the bolt to cut it. This ensures a stable cutting surface and reliable cutting without crushing the threaded part.
An electric threaded rod cutter is also available in a corded version. However, the battery-powered version is explained here.
Uses of Threaded Rod Cutters
All-thread bolts are used for suspending electrical and plumbing cables, cable trays, and piping from building ceilings, as well as for securing various equipment and lighting fixtures.
In these cases, all-thread bolts are installed in uniform lengths longer than necessary to allow for adjustment of the position (level) of piping, equipment, and other items to be installed. Therefore, after the piping or equipment is installed, the unneeded portion of the threaded rod bolt protruding from the nut or other part of the bolt is cut off with threaded rod cutters.
By using an all-thread cutter, it is possible to cut numerous threaded rods efficiently to the same length without crushing the threaded part.
Other applications include cutting all-thread bolts for concrete anchors.
How to Select Threaded Rod Cutters
The following points should be considered when selecting threaded rod cutters:
- Cutting Capacity (Cutting Screw Size)
Because they are often used in electrical and plumbing work, all-thread bolt sizes are mainly limited to the sizes listed below. Note: the size that can be cut may vary depending on the material of the all-thread bolt.
Examples of all-thread bolt sizes: M6, M8, M10, W3/8, W5/16, W1/2
Select the cutting capacity (bolt size) required for the job. - Battery Voltage (Capacity) *In Case of a Battery Type
Battery voltage (capacity) is classified by the output voltage, such as "DC 36V," "DC 18V," "DC 14.4V," "DC 10.8V," etc. The higher voltage will provide you with a longer time available for work. Also, the lower voltage will equate to a lighter weight. The appropriate voltage should be selected for the required working time.
Many of the batteries can be shared with other power tools of the same manufacturer. By using the same capacity, the battery and charger can be minimized.
List of 5 Threaded Rod Cutter Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Japan
-
-
-
Reed Manufacturing Co.
Threaded Rod Cutters
Company Overview
Reed Manufacturing was founded in 1896 in Erie, Pennsylvania. Reed Manufacturing is a distributor of pipe tools and vises for professional trades. Product lines include cutters & cutter wheels, pipe cutters, large diameter pipe tools, plastic pipe tools, water services tools, threaders & dies, test pumps & groovers, vises, wrenches, and general pipe working tools. New product lines include cordless pipe bevelers, pipe beveler adapter heads, cordless power drives, cordless water transfer pumps, oiler systems, rachet wrenches, utility clutches, pipe end prep tools, and squeeze tools.
-
-
-
-
-
DEWALT
DCS350B
Company Overview
Dewalt Inc. is a power tool manufacturing firm started in 1924 by Raymond DeWalt. It began as a small enterprise in Maryland but quickly expanded. They were reformed and reincorporated as DeWalt Inc. in 1947 and were purchased by American Machine & Foundry Co.Inc in 1949. Dewalt Inc. provides a diverse range of products such as power tools, hand tools, accessories, outdoor equipment, and workplace equipment. As of 2001, they produced and sold over 200 hand power equipment and 800 accessories. DeWalt is now a well-known tool brand among commercial contractors.
-
-
-
-
-
Allfasteners USA LLC
Threaded Rod Cutter
Company Overview
Allfastener, founded in 1994 and based in Ohio, America, manufactures and supplies fasteners and industrial tools. The company also provides engineering-backed suggestions for the right products and their usage. Allfastener also caters to steel fabrication industry and infrastructure. Its customers can may check details or place an order at a website. The company's freight partners and company-owned trucks utilize an advance dispatch system to ensure to deliver the ordered goods in accurate manner.
-
-
-
-
-
MCC Corporation
Threaded Rod Cutters
Manufacturer Overview
MCC Corporation, founded in the year 1928, is based in Tokyo, Japan as a supplier and manufacturer of professional tools. Their product portfolio includes cutters, wrenches, vises, accessories, power tools, and equipment. The company offers a creative, unique, innovative, professional, high-end quality, diverse range of tools and equipment. The products are used in multiple applications for various industries and machinery. The company also provides research and development, technical support, and customer services for tools.
-
-
-
-
-
Robert Bosch Tool Corporation
Threaded Rod Cutter
Manufacturer Overview
Robert Bosch Tool Corporation, headquartered in Mount Prospect, Illinois, is a manufacturer of power tools and accessories, established in 2003 when Robert Bosch GmbH merged its North American power tool and power tool accessory divisions into one organization. Bosch Tools offers a range of power tool lineups under various brands, including Bosch, Dremel, Neff, and others. Their product offerings include measuring and layout tools like laser and optical leveling devices, as well as 18-Volt cordless power tools like rotary and oscillating tools. Additionally, the company has developed a Tool Module to monitor and customize their tools using the Bosch Toolbox mobile application.
-
-
Threaded Rod Cutter Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Robert Bosch Tool Corporation |
43.8%
|
| 2 | MCC Corporation |
15.6%
|
| 3 | Allfasteners USA LLC |
15.6%
|
| 4 | Reed Manufacturing Co. |
15.6%
|
| 5 | DEWALT |
9.4%
|
Derivation Method
The ranking is calculated based on the click share within the threaded rod cutter page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- MCC Corporation: 173
Newly Established Company
- Robert Bosch Tool Corporation: 2003 (21 years ago)
- MCC Corporation: 1952 (72 years ago)
Company with a History
- MCC Corporation: 1952 (72 years ago)
- Robert Bosch Tool Corporation: 2003 (21 years ago)
Threaded Rod Cutter Manufacturers in United States
*Including some distributors, etc.
Global Distribution of Threaded Rod Cutter Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
3 | 75.0% |
Japan
|
1 | 25.0% |
